![photo](https://api.amu.ac.in/storage/images/empphoto/10077590-1707030987.png)
- DEPARTMENT_STAFF.QUALIFICATION
B.Sc Engg., M.Tech, Ph.D
- DEPARTMENT_STAFF.DESIGNATION
Associate Professor
- DEPARTMENT_STAFF.THRUST_AREA
Modeling and simulation, Statistical process control, Artificial intelligence, Metal forming, Casting, Welding, Machining, Process optimization
- DEPARTMENT_STAFF.ADDRESS
Md Israr Equbal, Syed Colony, New Sir Syed Nagar, Aligarh-202001
- DEPARTMENT_STAFF.MOBILE
9771838144
- DEPARTMENT_STAFF.EMAIL
israr_equbal@yahoo.co.in
- DEPARTMENT_STAFF.TIME_TABLE
Time Table II and IVth semTime Table I, III & Vth SEMAttendance B2M1 Workshop Tech IV
- Journal & Conference Publications, Book Chapters, Patent
Journal Publications
Jai Prakash, Azhar Equbal, Pranav Ravindrannair, Md Asif Equbal, Md. Israr Equbal “Optimizing the machining parameters during turning of EN 31 steel using TiN + Al2O3 + TiCN coated tungsten carbide tool” Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2023.04.473, 2022.
Azhar Equbal, Md. Asif Equbal, Md. Israr Equbal, Pranav Ravindrannair, Zahid A. Khan , Irfan Anjum Badruddin, Sarfaraz Kamangar, Vineet Tirth, Syed Javed, M. I. Kittur “Evaluating CNC Milling Performance for Machining AISI 316 Stainless Steel with Carbide Cutting Tool Insert” Materials, Vol. 15, No. 22, pp. 8051, https://doi.org/10.3390/ma15228051, 2022.
Ahmad Saood, Arshad Hussain Khan, Md Equbal, Kuldeep K Saxena, Chander Prakash, Nikolay Ivanovich Vatin, Saurav Dixit “Influence of Fiber Angle on Steady-State Response of Laminated Composite Rectangular Plates” Materials, Vol. 15, No. 16, pp. 2655, https://doi.org/10.3390/ma15165559, 2022.
Azhar Equbal, Mohammad Ali, Md Asif Equbal, SC Srivastava, Zahid A Khan, Md Israr Equbal, Irfan Anjum Badruddin, Khalid Mohamed El-Hady, Sarfaraz Kamangar “Characteristics of Conventional and Microwave Sintered Iron Ore Preform” Materials, Vol. 15, No. 7, pp. 5559, https://doi.org/10.3390/ma15072655, 2022.
Azhar Equbal, Md. Israr Equbal, Irfan Anjum Badruddin, Ali Algahtani “A critical insight into the use of FDM for production of EDM electrode” Alexandria Engineering Journal, https://doi.org/10.1016/j.aej.2021.09.033, 2021.
Azhar Equbal, Anoop Kumar Sood, Md. Israr Equbal, Irfan Anjum Badruddin, Zahid A. Khan “RSM based investigation of compressive properties of FDM fabricated part” CIRP Journal of Manufacturing Science and Technology, Vol. 35, pp. 701-714, 2021.
Jai Prakash, Md Israr Equbal, Azhar Equbal “Investigative study on dimensional accuracy of machined cavity formed during EDM of AISI 1035” Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.06.435, 2021.
R. K. Ohdar, Azhar Equbal, Md Israr Equbal “Hot deformation studies of AISI 1035 steel using thermo mechanical simulator” Materials Today: Proceedings, Vol. 26, pp. 3305–3310, 2020.
Azhar Equbal, Mohammad Shamim, Irfan Anjum Badruddin, Md. Israr Equbal, Anoop Kumar Sood, Nik Nazri Nik Ghazali, Zahid A. Khan “Application of the combined ANN and GA for multi-response optimization of cutting parameters for the turning of glass fiber-reinforced polymer composites” Mathematics, Vol. 8, No. 947, pp. 1-20, 2020.
Azhar Equbal, Md Israr Equbal, Anoop Kumar Sood “An investigation on the feasibility of fused deposition modelling process in EDM electrode manufacturing” CIRP Journal of Manufacturing Science and Technology, Vol. 26, pp. 10-25, 2019.
Azhar Equbal, Md Israr Equbal, Anoop Kumar Sood “PCA-based desirability method for dimensional improvement of part extruded by fused deposition modelling technology” Progress in Additive Manufacturing, Vol. 4, No. 3, pp. 269–280, 2019.
Md Israr Equbal, R. K. Ohdar, Md. Asif Equbal, Azhar Equbal “Effect of temperature and strain rate of the hot deformation of V microalloyed steel on flow stress” International Journal of Materials Forming and Machining Processes, Vol. 6, No. 1, pp. 40-52, 2019.
A. Equbal, Md A. Equbal, A K Sood, R Pranav, Md. I. Equbal “A review and reflection on part quality improvement of fused deposition modelled parts” IOP Conf. Series: Materials Science and Engineering, Vol. 455, pp. 1-8, 2018.
Md Israr Equbal, Azhar Equbal, Md Asif Equbal, R. Pranav “Optimization of hot forging parameters using Taguchi method and grey relational analysis for AISI 1035 Steel” International Journal of Microstructure and Materials Properties, Vol. 13, No. ¾, pp. 198- 212, 2018.
Md Israr Equbal, Azhar Equbal, Debasis Mukerjee “A full factorial design based desirability function approach for optimization of hot forging of vanadium micro-alloyed steel” Metallography, Microstructure, and Analysis, Vol. 6, No. 1, pp. 1–20, 2018.
Md Israr Equbal, Rajkumar Ohdar, Pinaki Talukdar, Debasis Mukerjee “Hot forging behavior of medium carbon and microalloyed steel: A comparative study” International Journal of Microstructure and Materials Properties, Vol. 12, No. 1/2, pp. 1-11, 2017.
Azhar Equbal, Md Israr Equbal, Anoop Kumar Sood, Md. Asif Equbal “A comparative study on electroplating of FDM parts” International Journal of Technology, Vol. 8, No. 5, pp. 328- 336, 2017.
Azhar Equbal, Anoop Kumar Sood, Md. Asif Equbal, Md Israr Equbal “An Investigation on material removal rate of EDM process: A response surface methodology approach” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 11, No. 4, pp. 845-850, 2017.
Parwez Alam, Md Israr Equbal, Avtar Krishna “Die Stress Optimization using Quantum Behaved Particle Swarm Optimization” International Journal of Mechanical and Production Engineering Research and Development, Vol. 7, No. 1, pp. 95-104, 2017.
Md Israr Equbal, Parwez Alam, Rajkumar Ohdar, Md Serfraz Alam “Studies on Lubrication Behavior of 35C8 Steel Using Ring Compression Test and Finite Element Simulation” International Journal of Mechanical And Production Engineering, Vol. 4, No. 11, pp. 4-8, 2016.
Md Israr Equbal, Parwez Alam, Rajkumar Ohdar, Kumar Aniket Anand, Md. Serfraj Alam “Effect of Cooling Rate on the Microstructure and Mechanical Properties of Medium Carbon Steel” International Journal of Metallurgical Engineering, Vol. 5, No. 2, pp. 21-24, 2016.
Md Israr Equbal, Rajkumar Ohdar, Azhar Equbal, Anoop Kumar Sood “Grey based Taguchi method for optimization of hot forging of connecting rod” International Journal of Manufacturing Research, Vol. 11, No. 1, pp. 89-109, 2016.
Pinaki Talukdar, RajKumar Ohdar, Balbir Singh, Md Israr Equbal “Optimization of process parameters in hot forging of medium carbon micro-alloyed steel” Applied Mechanics and Materials, Vols. 813-814, pp. 563-568, 2015.
Azhar Equbal, Md Israr Equbal, Rajkumar Ohdar “Isothermal Forging of Ti-6Al-4V Alloy - Flow Stress Evaluation and Optimization” International Journal of Scientific Research in Science, Engineering and Technology, Vol. 1, No. 5, pp. 235-238, 2015.
Rajkumar Ohdar, Pinaki Talukdar, Md Israr Equbal “Evaluation of friction coefficient of 38MnVS6 medium carbon micro-alloyed steel in hot forging process by using ring compression test” Technology Letters, Vol. 2, No. 3, pp. 12-16, 2015.
Md Israr Equbal, Rajkumar Ohdar, Balbir Singh and Pinaki Talukdar “Forgeability Study of Medium Carbon Micro-Alloyed Forging Steel” International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering Vol. 9, No. 3, pp. 391-395, 2015.
Md Israr Equbal, Pinaki Talukdar, Vinod Kumar, Rajkumar Ohdar “Deformation Behavior of Micro-Alloyed Steel by Using Thermo Mechanical Simulator and Finite Element Method” Procedia Materials Science journal, Vol. 6, pp. 674 –681, 2014.
Md Israr Equbal, Randhir kumar, Mohammad Shamim, R.K. Ohdar, “A grey-based Taguchi method to optimize hot forging process” Procedia Materials Science journal, Vol. 6, pp. 1495-1504, 2014.
Md Israr Equbal, Rajkumar Ohdar, Anoop Kumar Sood “Taguchi based simulation approach for optimization of closed die forging” International Journal of Conceptions on Mechanical and Civil Engineering, Vol. 1, No. 1, pp. 84-87, 2013.
Md Israr Equbal, Pinaki Talukdar, Rajkumar Ohdar “Application of optimization techniques in metal forging- A review and reflection” International Journal of Scientific & Engineering Research, Vol. 4, No. 8, 2013.
Rajkumar Ohdar, Md Israr Equbal, Vinod Kumar “Die Stress Optimization Using Finite Element and Taguchi Method” Materials Science Forum, Vol. 762, pp. 319-324, 2013.
Md Israr Equbal, Rajkumar Ohdar “Forging Design and Development of Connecting Rod, Forgings Today” Vol. 3, No. 2, pp. 17-24, 2013.
Md Israr Equbal, Rajkumar Ohdar, Md. Nadeem Bhat and Suhail Ahmad lone “Preform Shape Optimization of Connecting Rod Using Finite Element Method and Taguchi Method” International Journal of Modern Engineering Research, Vol. 2, No. 6, pp. 4532-4539, 2012.
Azhar Equbal, Sankar Behera, Md Israr Equbal, Rajkumar Ohdar and S. N. Sinha “Prediction of Flow Stress of Ti-6Al-4V Alloy Forging: An Artificial Neural Network and Neuro-fuzzy Based Approach” International Journal of Science & Technology, Vol. 1, No. 2, pp. 57-64, 2011.
Rajkumar Ohdar, Sankar Behera, Israr Equbal and Azhar Equbal “Process Parameters Optimization for Isothermal Forging of Ti-6Al-4V Alloy using Taguchi Method and Artificial Neural Network” CiiT International journal of Automation and Autonomous System, Vol. 3, pp. 521-525, No. 11, 2011.
CONFERENCE PUBLICATIONS
Jai Prakash, Azhar Equbal, Pranav Ravindrannair, Md Asif Equbal, Md. Israr Equbal “Optimizing the machining parameters during turning of EN 31 steel using TiN + Al2O3 + TiCN coated tungsten carbide tool” 5th International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICRAAMM-2022). 16-17, December 2022, MLRIT, Hyderabad, India.
Jai Prakash, Md Israr Equbal, Azhar Equbal “Investigative study on dimensional accuracy of machined cavity formed during EDM of AISI 1035” 3rd International Conference on Advances in Mechanical Engineering and Technology (ICAMEN 2021). 18-19, March 2021, Manipal University, Jaipur, India.
R. K. Ohdar, Azhar Equbal, Md Israr Equbal “Hot deformation studies of AISI 1035 steel using thermo mechanical simulator” 10th International Conference on Materials Processing and Characterisation (ICMPC 2020). 8-9, March 2014, Hydrabad, India. 21–23, February 2020, GLA University, Mathura, India.
Govindu Vamshi Krishna, Sesha Sai Gurudatta, Pranav Ravindran nair, Md Israr Equbal “Design & Analysis of Hydraulic Fixture for Wabco Body Housing” 7th International and 28th All India Manufacturing Technology, Design and Research Conference 2018 (AIMTDR 2018). 13 -15, December, 2018, Anna University, Chennai, India.
Azhar Equbal, Md. Asif Equbal, A. K. Sood, R. Pranav, Md Israr Equbal “A Review and Reflection on Part Quality Improvement of Fused Deposition Modelled Parts” 2nd International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2018). 13-14, July, 2018, MLRIT Hyderabad, India.
Azhar Equbal, Anoop Kumar Sood, Md Israr Equbal, Pranav Ravindrannair “Thick Film Copper Deposition on FDM Processed ABS Parts By Using Aluminum Charcoal Deposition Process” National Conference on Advances in Mechanical Engineering and Nanotechnology (NCAMENT2018). 29-30, June 2018, University College of Engineering, Osmania University, Hyderabad, India.
Pranav Ravindrannair, Mir Akber Mohsin Ali, Umesh G., Md Israr Equbal “Parametric Analysis of Titanium Alloy Using Abrasive Jet Machining Process” International Conference on Latest Trends in New Era of Engineering, Science, Arts, management, Agriculture, Law, Pharmacy and Medical Science (LTNEESAMALPMS-18). 25-26, Feb 2018, Hyderabad, India.
Pranav R., Md Israr Equbal , A Raghavendra Bhat, K. Kishore “Multi Optimization of the Process Parameters of the WEDM of a Stainless Steel 440C component using Taguchi Grey relational analysis” 1st International Conference on Innovations in Mechanical Engineering (ICIME-2018). 5-6, January, 2018, GNIT Hyderabad, India.
Kumar Aniket Anand, Md Serfraj Alam, Md Israr Equbal “Optimization of hot forging parameters using Taguchi method and Grey Relational Analysis for AISI 1035 Steel” 2nd International Conference on Mechanical and Manufacturing Engineering (ICMME 2017). 6- 7, April, 2017, Kanchipuram, Tamil Nadu, India.
Azhar Equbal, Anoop Kumar Sood, Md. Asif Equbal, Md Israr Equbal “An investigation on material removal rate of electrical discharge machining process: A Response surface methodology approach” 19th International Conference on Mechanical and Systems Engineering (ICMSE 2017). 07-08, February, 2017, Mumbai, India.
Md Israr Equbal, Md Serfraj Alam, Rajkumar Ohdar “Multi-objective optimization of hot forging process using genetic algorithms with finite element method” International Conference on Advances in Materials and Manufacturing (ICAMM ’17). 19-21, January, 2017, National Institute of Foundry and Forge Technology, Ranchi, India.
Parwez Alam, Md Israr Equbal, A. Bhattacharya, R.K. Ohdar “A grey-based Taguchi method to optimize preform in close die forging” International Conference on Technological Innovations in Engineering (ICTIE-2016). 15-16, December, 2016, Pune, India.
Md Israr Equbal, Parwez Alam, Rajkumar Ohdar, Md. Serfraj Alam “Studies on lubrication behavior of 35C8 steel using ring compression test and finite element simulation” International Conference on Recent Innovations in Science, Engineering, Technology and Management (ASAR-ICRISETM-2016). 17-18, September, 2016, Hyderabad, India.
Md Israr Equbal, Rajkumar Ohdar, Pinaki Talukdar “Improving mechanical properties of hot forged part using grey taguchi method” International Conference on Materials Science & Technology (ICMTECH-16). 1-4, March, 2016, Delhi, India.
Md Israr Equbal, Rajkumar Ohdar, Balbir Singh, Pinaki Talukdar “Hot forging behavior of medium carbon and medium carbon vanadium microalloyed steels: A comparative study” 4th International Conference on Thermo-mechanical Simulation and Processing of Steels, (SimPro’16). 10-12, February 2016, Research and Development Centre for Iron & Steel (RDCIS), Ranchi, India.
Md Israr Equbal, Md Talha, Balbir Singh, Rajkumar Ohdar “Effect of cooling rate on the microstructure and mechanical properties of medium carbon steel” 4th International Conference on Thermo-mechanical Simulation and Processing of Steels, (SimPro’16). 10-12, February, 2016, Research and Development Centre for Iron & Steel (RDCIS), Ranchi, India.
Kumar Aniket Anand, Kartik Nageswaran, Md. Serfraj Alam, Vinod Kumar, Md Israr Equbal “Hot deformation behavior studies on medium carbon steel by thermo mechanical simulation and finite element method” 4th International Conference on Thermo-mechanical Simulation and Processing of Steels, (SimPro’16). 10-12, February, 2016, Research and Development Centre for Iron & Steel (RDCIS), Ranchi, India.
Md Israr Equbal, Rajkumar Ohdar, Pinaki Talukdar, Vinod Kumar “Parametric Optimization of Hot Compression Process of Medium Carbon Steel by Using Taguchi Method” National Conference on Thermo-mechanical processing of Steels & 5th Gleeble User Workshop India (GUWI-2015). 6-7, August, 2015, CSIR-National Metallurgical Laboratory, Jamshedpur, India.
Pinaki Talukdar, Rajkumar Ohdar, Balbir Singh, Md Israr Equbal, “Optimization of process parameters in hot forging of medium carbon micro-alloyed steel” International Conference on Mechanical and Manufacturing Engineering (ICMME 2015). 2-3, April, 2015. Kanchipuram, Tamil Nadu, India.
Md Israr Equbal, Rajkumar Ohdar, Balbir Singh, Pinaki Talukdar, “Forgeability Study of Medium Carbon Micro-Alloyed Forging Steel” 17th International Conference on Mining, Material and Metallurgical Engineering (ICMMME 2015). 29-30, March 2015, Singapore.
Md Israr Equbal, P. Talukdar, Vinod Kumar, R.K.Ohdar “Deformation Behavior of Micro- Alloyed Steel by Using Thermo Mechanical Simulator and Finite Element Method” 3rd International Conference on Materials Processing and Characterisation (ICMPC’ 14). 8-9, March 2014, Hydrabad, India.
Md Israr Equbal, Randhir kumar, Mohammad Shamim, Rajkumar Ohdar “A grey-based Taguchi method to optimize hot forging process” 3rd International Conference on Materials Processing and Characterisation (ICMPC’ 14). 8-9, March 2014, Hydrabad, India.
Md Israr Equbal, Pinaki Talukdar, Rajkumar Ohdar, Irfan Samad Wani “Evaluation of friction coefficient by experiment and FEM for medium carbon alloy steel in hot forging process” International Conference on Advances in Tribology (ICAT’14). 21-24, February 2014, Calicut , Kerala, India.
Rajkumar Ohdar, Md Israr Equbal, Vinod Kumar “Die Stress Optimization Using Finite Element and Taguchi Method” The 7th International Conference on Physical and Numerical Simulation of Material Processing (ICPNS’13). 16-19 June 2013, Oulu, Finland.
Md Israr Equbal, Pinaki Talukdar, Rajkumar Ohdar “Application of optimization techniques in metal forging- A review and reflection”. International Conference on global innovations in technology and sciences (ICGITS’13). 4-6, April 2013, Kotayam, Kerala, India.
Md Israr Equbal, Rajkumar Ohdar, Pinaki Talukdar “Parametric Optimization of Closed Die Forging Process Using Fem and Taguchi Method” 3rd International Conference on Thermo- mechanical Simulation and Processing of Steels (SimPro’12), 12-14, December 2012, Research and Development Centre for Iron & Steel (RDCIS), Ranchi. India.
Md Israr Equbal, Anoop Kumar Sood, Aarif Hussain “Die Stress Optimization Using Quantum Behaved Particle Swarm Optimization” 3rd International Conference on Thermo- mechanical Simulation and Processing of Steels (SimPro’12). 12-14, December 2012, Research and Development Centre for Iron & Steel (RDCIS), Ranchi. India.
Md Israr Equbal, Rajkumar Ohdar, Anoop Kumar Sood “Taguchi based simulation approach for optimization of closed die forging” The Second International Conference on Engineering Technology and Management (ICETM’12), 7-8, September 2012, Tirupati, Andhra Pradesh, India.
Md Israr Equbal, Rajkumar Ohdar “Optimization of Preform in Closed Die Forging using Grey Taguchi Method” National Forging Seminar on Recent Trends in Metal Forming Technology and Heat Treatment (NFS’12). 27th September, 2012, Bangalore, India.
Md Israr Equbal, Rajkumar Ohdar, Anoop Kumar Sood “Optimum Forging Preform Shape Design Using Deform And Taguchi Method” 27th National Convention of Production Engineers, National Seminar on Advancements in Manufacturing - Vision 2020, 25-26 May, 2012, BIT- Mesra, Ranchi, India.
Rajkumar Ohdar, Israr Equbal, Azhar Equbal, Sankar Behera “Process Parameter optimization for Isothermal Forging of Ti-6Al-4V alloy: A Soft Computing Approach” International Conference on Advances in Engineering & Technology (ICAET’11), 27-28, May 2011, Nagapattinam, Chennai, India.
CHAPTER IN BOOKS
R Pranav, Md I Equbal, Azhar Equbal & K Kishore (2022). Taguchi-Based GRA Method for Multi-Response Optimization of Spool Bore in EHSV Made Up of Stainless Steel 440C, Chapter 4 in Advanced Manufacturing Methhods, Smart Processes and Modeling for Optimization, Editor: Catalin I. Pruncu and Jamal Zbitou, pp. 83-100, CRC Press, Taylor & Francis, ISBN EISBN: 9780367822385.
Govindu Vamshi krishna, Koppaka Shesha Sai Gurudatta, Pranav Ravindran nair & Md Israr Equbal (2019). Design and Analysis of Hydraulic Fixture for WABCO Body Housing, Chapter 64 in Advances in Simulation, Product Design and Development, Editors: M. S. Shunmugam and M. Kanthababu, pp. 773-781, Springer Singapore, ISBN 978-981-329-487-5, 978-981- 329-486-8. Series ISSN 2522-5022.
Azhar Equbal, Md Israr Equbal, Md Asif Equbal & Anoop Kumar Sood (2019). Multi-Criterion Decision Method for Roughness Optimization of Fused Deposition Modelled Parts, Chapter 12 in Additive Manufacturing Technologies From an Optimization Perspective, Editors: Kaushik Kumar, Divya Zindani, J. Paulo Davim, pp. 235-262, IGI Global, ISBN13: 9781522591672, ISBN10: 1522591672, EISBN13: 9781522591696.
Azhar Equbal, Md Israr Equbal, Md Asif Equbal & Anoop Kumar Sood (2018). An insight on current and imminent research issues in EDM, Chapter 2 in Non-Conventional Machining in Modern Manufacturing Systems, Editors: Kaushik Kumar, J. Paulo Davim, Nisha Kumari, pp. 33-54, IGI Global, ISBN 1522561617, 9781522561613.
Azhar Equbal, Md Asif Equbal & Md Israr Equbal (2017). Optimization techniques in Electric discharge machining process, Chapter 14 in Industrial Engineering and management practices (International Edition), Editor: Dr. Ashok G. Matani, pp. 269-280, International Research Publication House, Delhi, India, ISBN 978-93-84443-56-6.
PATENT:
· Pranav Ravindrannair, Mudavath Rajesh Kumar, Fazel Hayatt Khan, Dr. Md Israr Equbal, Mahankali Balachandar, Yadugani Vineeth, Tahmina Fatima, Vemula Haygriva, Kuchana Manoj Kumar, Kanak Gehloth, Kata Nivith (Published) “AUTOMATIC ELECTRO-MAGNETIC GEAR TRANSMISSION FOR TWO WHEELERS” Patent Application No.202341010163A published on 24.02.2023, Patent Office Journal No. 08/2023 Dated 24/02/2023, pp. 12954.