Department of Mechanical Engineering
समाचार और प्रकाशन
Projects received by the students from ASHRAE
Project Title Amount PI & CO-PI
Design and fabrication of
Multi-Evaporator Refrigeration Dr. Taliv Hussain and
System for different $ 4810
food storage as a training Dr. Mohammad Asif
and demonstration unit.
Design and development of
cooling tower with improved $ 4977 Dr. Taliv Hussain and
performance as a laboratory Dr. Mohammad Asif
experimental set-up
Design and Development of a
Cryocooler based on Dr. Mohammad Asif
Linde-Hampson Refrigerating $ 4996 Dr. Taliv Hussain and
cycle for different specimen Assistant Professors Department
preservation with performance of Mechanical Engineering
optimization using ML Model. ZHCET, AMU
Scholarships received by students from ASHRAE
B.E. Mechanical Engineering student selected to receive $5000 Scholarship from ASHRAE, USA
Mr. Sahib Zubair. BE Mechanical Engg. III year, a student member of ASHRAE-AMU student chapter, has been selected to receive the Society’s Hoffman Family Scholarship from ASHRAE, USA for the 2023-2024 academic year. The one-year $5,000 scholarship is awarded for his outstanding scholastic and leadership abilities, character, potential service to the HVAC&R profession and financial need. It is designed to assist in his educational pursuit of a bachelor’s degree in Mechanical Engineering and is to be used exclusively for his tuition and related fees required for enrollment, including books, supplies and equipment at Aligarh Muslim University.
News of Events at the Department (2021-2022)
- Felicitation ceremony to honour significantthe teachers during 2020-21. 30.03.2022contribution by
A felicitation ceremony to honour the teachers was held in the conference room of the department on 30th March 2022 at 1 PM. The Dean Faculty of Engineering, Prof. Pervez Mustajab and The Chairman of the Department of Mechanical Engineering, Prof. Mohammad Muzammil congratulated and presented a certificate of appreciation to several senior as well as young teachers for their significant contribution to the department during the 2020-21 academic year. The session was moderated by Mr Nafees Ahmad, Head of the Thermal Section at the Department of Mechanical Engineering.
The senior teachers who were honoured included Prof. Mohammad Altamush Siddiqui, Prof. Syed Fahad Anwer and Prof. Faisal Talib, and among the young teachers were Dr Shahid Husain, Dr Mohammad Asif, Dr Md. Reyaz Arif, Dr Muhammed Muaz and Dr. Mohd. Furquan.
- ASHRAE AMU student chapter participated in an Inter-college cricket tournament. 5.03.2022
On 5th March 2022 (Saturday), ASHRAE AMU student chapter team members participated in an Inter-college cricket tournament in Nehru Nagar New Delhi which was organized by ASHRAE India Chapter. This event was also sponsored by Daikin, Fan Air, Mandev Tubes, and Air Flow Pvt. Ltd. The ASHRAE cricket was team guided by Mr. Taliv Hussain and Dr. Mohammad Asif
- ASHRAE AMU Student Chapter receives a grant worth 15000 USD from ASHRAE USA for the session 2022-23.
- Webinar on “Autonomous Ocean Systems-Emerging & Future Technology” 6.01.2022
A webinar on “Autonomous Ocean Systems-Emerging & Future Technology” was organized by the Department of Mechanical Engineering, Zakir Husain College of Engineering and Technology, Aligarh Muslim University (AMU). The webinar was held on 6th January 2022 from 12:00 noon – 1:15 PM. The resource person was Dr. R. Venkatesan (Scientist G & Programme Director, OOS, National Institute of Ocean Technology, Chennai). The welcome address was delivered by Prof M Muzammil (Chairperson, Department of Mechanical Engineering, AMU), and a vote of thanks was extended by Dr. Abdullah Yousuf Usmani (Assistant Professor, Department of Mechanical Engineering, AMU). The event was organized by Dr. Saleem Anwar Khan (Professor, Department of Mechanical Engineering, AMU), Dr. Abdullah Yousuf Usmani, and Dr. Md. Reyaz Arif (Assistant Professor, Department of Mechanical Engineering, AMU).
- Webinar on 'Commercialization of Technology Innovations: Issues and Challenges'. 4.01.2022
A webinar on “Commercialization of Technology Innovations: Issues and Challenges” was organized by the Department of Mechanical Engineering, Z H College of Engineering and Technology, Aligarh Muslim University (AMU). The webinar was held on 04th Jan. 2022 from 02:30-04:00 PM. The resource person was Dr. Hemantkumar Bulsara (Associate Professor (Management) and In-Charge: Management section, S. V. National Institute of Technology NIT, Surat). The welcome address was delivered by Prof M Muzammil (Chairperson, Department of Mechanical Engineering, AMU), and a vote of thanks was extended by Prof. Faisal Talib (Department of Mechanical Engineering, AMU). The event was coordinated by Dr. Muhammed Muaz (Assistant Professor, Department of Mechanical Engineering, AMU).
- Webinar on 'Entrepreneurship and Start-up Ecosystem of India'. 27.12.2021
- One-week FDP on"Recent Advances in Heat Transfer and Combustion Engineering, (RAHTCE)’ Nov 2021
A webinar on “Entrepreneurship and Start-up Ecosystem of India” was organized by the Department of Mechanical Engineering, Zakir Husain College of Engineering and Technology, Aligarh Muslim University (AMU). The webinar was held on 27th December 2021 from 3:00 - 4:00 PM. The resource person was Mr M. Parvez Alam (CEO and Director of Crescent Innovation & Incubation Council (CIIC), Chennai). The welcome address was delivered by Prof M Muzammil (Chairperson, Department of Mechanical Engineering, AMU), and a vote of thanks was extended by Dr Md. Reyaz Arif (Assistant Professor, Department of Mechanical Engineering, AMU). The event was coordinated by Dr Saleem Anwar Khan (Professor, Department of Mechanical Engineering, AMU) and Dr Md. Reyaz Arif.
A one-week FDP was organized by the Department of Mechanical Engineering, AMU, Aligarh entitled ‘Recent Advances in Heat Transfer and Combustion Engineering, (RAHTCE)’ on November 08-12, 2021. A total of 295 participants registered for the event. Lectures were delivered by Dr Dibakar Rakshit, Dr Ashoke De, Dr Santanu De, Dr Andallib Tariq, Dr Sreedhara, Sheshadri, Dr Peter Woodfield, Dr Fatemeh Salehi, Dr Khizer Saeed, Mr Shahi Riaz, Mr Vinay Kumar and the event was coordinated by Prof. Shah Shahood Alam, Prof. Mohammed Faizan, Dr Mohammad Asif, Dr Sanaur Rehman, Dr Shahid Husain.
- Webinar on 'Air Pollution Monitoring' 6.11.2021
A webinar was organized by the Department of Mechanical Engineering, AMU, Aligarh entitled ‘Air Pollution Monitoring’ on 06/11/2021. A total of 56 participants registered for the event. The lecture was delivered by Dr. Saifi Izhar, Ph.D. (IITK), Department of Civil Engineering, Indian Institute of Technology, Dhanbad, and the event was Coordinated by Dr. Mohd Furquan.
- Webinar on ‘Qualification for Industry 4.0’ 27.10.2021
A webinar was organized by the Department of Mechanical Engineering, AMU, Aligarh entitled ‘Qualification for Industry 4.0’ on 27/10/2021. A total of 118 participants registered for the event. The lecture was delivered by Mr. Usman Ali, Didactic Trainer Festo India Pvt. Ltd. and the event was coordinated by Dr. Akhter Husain Ansari and Dr. Muhammed Muaz.
- Webinar on ‘Bibliometric Analysis: A Systematic Literature Review Tool’ 23.10.2021
A webinar was organized by the Department of Mechanical Engineering, AMU, Aligarh entitled ‘Bibliometric Analysis: A Systematic Literature Review Tool’ on 23/10/2021. A total of 157 participants registered for the event. The lecture was delivered by Dr. Vinod Kumar, IIIT, Lucknow, and the event was coordinated by Prof. Faisal Talib and Dr. Muhammed Muaz.
Webinar on ‘Defence Product Development Cycle (DPDC) – Mechanical Engineering Perspective and Career Opportunities in DRDO’ 09.10.2021
A webinar was organized by the Department of
Mechanical Engineering, AMU, Aligarh entitled ‘Defence Product Development
Cycle (DPDC) – Mechanical Engineering Perspective and Career Opportunities
in DRDO’ on 09/10/2021. A total of 199 participants registered for the
event. The lecture was delivered by Mr. Shabir Ahmed Joint Director,
DRDO-IRDE, Dehradun and the event was Coordinated by Prof. Faisal Hasan
and Dr. Farhan Ahmad Shamim.
- Webinar on ‘Automation & Industry 4.0’ 29.09.2021
A webinar was organized by the Department of Mechanical Engineering, AMU, Aligarh entitled ‘Automation & Industry 4.0’ on 29/09/2021. A total of 308 participants registered for the event. Lectures were delivered by Mr. Akash Gaurav and Mr. Rajesh Singh and the event was Coordinated by Dr. Parveen Farooquie and Mr. Mohammed Nasir Khan.
PUBLICATIONS
2023 Publications
Atif, M., Anwer, F., Talib, F., Alam, R. and Masood , F. 2023. Analysis of machine learning classifiers for predicting Diabetes Mellitus in the preliminary stage. IAES International Journal of Artificial Intelligence, (IJ-AI)2252-8938
Tariq, Mohammad; Parakkal, Muhammed Shareef; Khan, Saif; Khan, Abid Ali; 2023. Assessment of Changes in Craniofacial Structures, Bite Force and Periodontal Status Following Fixed Functional Appliance Therapy. Turkish Journal of Orthodontics, PMCID: PMC10140660
Ahmad Abdullah, Shantanu Saraswat, Faisal Talib 2023. Barriers and strategies for sustainable manufacturing implementation in SMEs: A hybrid fuzzy AHP-TOPSIS framework. Sustainable Manufacturing and Service Economics
Abdullah, A., Saraswat, S. and Talib, F. 2023. Barriers and strategies to sustainable manufacturing implementation in SMEs: A hybrid fuzzy AHP-TOPSIS framework. Sustainable Manufacturing and Service Economics, 2667-3444
MY Yasin, B Prakash, N ur Rahman, MN Alam, AH Khan 2023. Design, fabrication, nonlinear analysis, and experimental validation for an active sandwich beam in strong electric field and thermal environment. Journal of Sound and Vibration, 0022-460X
Abdullah, A., Saraswat, S. and Talib, F. 2023. Impact of smart, green, resilient and lean manufacturing system on SMEs performance: a data envelopment analysis (DEA) approach. Sustainability, 2071-1050
Ahmad Abdullah, Shantanu Saraswat, Faisal Talib 2023. Impact of Smart, Green, Resilient, and Lean Manufacturing System on SMEs’ Performance: A Data Envelopment Analysis (DEA) Approach. Sustainability
Upadhyay, Y., Talib, F., Zaheen, S.A. and Ansari, M.S. 2023. Industry 4.0 adoption in MSMEs: a hybrid Fuzzy AHP-TOPSIS framework. Proceedings on Engineering Sciences, 2683-4111
Abdul Faheem, Faisal Hasan, Abid Ali Khan, Bharat Singh, Md Ayaz, Farhan Shamim, Kuldeep K. Saxena, Sayed M. Eldin 2023. Parametric Optimization of Electric Discharge Machining of Ni55.65Ti based shape memory alloy using NSGA II with TOPSIS. Journal of Materials Research and Technology
Mohd Bilal Naim Shaikh, Mohammed Ali 2023. Recent progress on the application of nano-cutting fluid in turning process. Nanomaterials for Sustainable Tribology
Saman Ahmad, Mohammad Muzammil 2023. Revised NIOSH lifting equation: a critical evaluation. International Journal of Occupational Safety and Ergonomics
Saman Ahmad, Mohammad Muzammil 2023. Revised NIOSH lifting equation: a critical evaluation. International Journal of Occupational Safety and Ergonomics, 1080-3548
Obaidullah Khawar, MF Baig, Sanjeev Sanghi 2023. Skin-friction drag reduction by axial oscillations of the inner cylinder in turbulent Taylor–Couette flows. Physics of Fluids
Josaiman, S.K., Talib, F. and Faisal, M.N. 2023. Strategic planning for environmental sustainability in supply chains: an ISM and MICMAC approach. International Journal of Services and Operations Management, 1744-2389
Suhail Ahmad Khan, Mohammad Altamush Siddiqui, Mohammad Asjad, Zahid A Khan, Shahid Husain 2023. CFD simulation and optimization of natural convection in a vertical annulus with nanofluids. International Journal of Thermal Sciences, 1290-0729
Mohammad Tariq, Muhammed Shareef Parakkal, Saif Khan, Abid Ali Khan 2023. Assessment of Changes in Craniofacial Structures, Bite Force and Periodontal Status Following Fixed Functional Appliance TherapyTurkish Journal of Orthodontics, 2148-9505
Anees A Ansari, MA Majeed Khan, M Alam 2023. Perovskite nanoparticles as a sensing platform for electrochemical glucose detection. Journal of Materials Science: Materials in Electronics, 0957-4522
Faisal Talib, Mohd Nishat Faisal, Bader A El Esmael, Shinta Dewi Komalasari 2023. Ranking and prioritisation of barriers to SMEs internationalisation in emerging economies. International Journal of Advanced Operations Management, 1758-938X
Mohammad Athar Khan, Saif Masood, Syed Fahad Anwer, Saleem Anwar Khan, Md Reyaz Arif 2023. Vortex induced vibration for mixed convective flow past a square cylinder. International Journal of Heat and Mass Transfer, 0017-9310
Ibrahim B Mansir, Pradeep Kumar Singh, Azher M Abed, Hawzhen Fateh M Ameen, Saleem Anwar Khan, Abdullah Yousuf Usmani, Rashid Ali, H Elhosiny Ali, H Algarni, Makatar Wae-hayee 2023. Investigating the effects of employing a cooling radiator on MHD natural convection by injecting MWCNTs into water. Ain Shams Engineering Journal, 2090-4479
Yan Cao a, Samia Nasr b, Pradeep Kumar Singh c, Hawzhen Fateh M. Ameen d, Azher M. Abed e, Saleem Anwar Khan f, Abdullah Yousuf Usmani f, Rashid Ali f, Fatma Aouaini g, Raymond Ghandour h 2023. Combination effect of and nanoparticles on natural convection inside an inclined enclosure: CFD numerical approach. Ain Shams Engineering Journal, 2090-4479
2022 Publications
1. Gani, A., James, A.T., Asjad, M. and Talib, F., 2022. Development of a manufacturing sustainability index for MSMEs using a structural approach. Journal of Cleaner Production, 353, p.131687.
2. Alqaed, S., Almehmadi, F.A., Mustafa, J., Husain, S. and Cheraghian, G., 2022. Effect of nano phase change materials on the cooling process of a triangular lithium battery pack. Journal of Energy Storage, 51, p.104326.
3. Parvez, M.T. and Khan, A.H., 2022. Influence of geometric imperfections on the nonlinear forced vibration characteristics and stability of laminated angle-ply composite conical shells. Composite Structures, 291, p.115555.
4. Mohammadpour, J., Husain, S., Salehi, F. and Lee, A., 2022. Machine learning regression-CFD models for the nanofluid heat transfer of a microchannel heat sink with double synthetic jets. International Communications in Heat and Mass Transfer, 130, p.105808.
5. Amir, M., Usmani, A.Y., Varshney, M., Anwer, S.F., Khan, S.A., Islam, N. and Pasha, A.A., 2022. Analysing Spatio-temporal flow hemodynamics in an artery manifesting stenosis. International Journal of Mechanical Sciences, 218, p.107072.
6. Shahzer, M.A., Khan, M.A., Anwer, S.F., Khan, S.A., Khan, M.S., Algethami, A. and Alsehli, M., 2022. A comprehensive investigation of vortex-induced vibrations and flow-induced rotation of an elliptic cylinder. Physics of Fluids, 34(3), p.033605.
7. Khawar, O., Baig, M.F. and Sanghi, S., 2022. Counter-rotating Taylor-Couette flows with radial temperature gradient. International Journal of Heat and Fluid Flow, 95, p.108980.
8. Ahmad, S. and Muzammil, M., 2022. Revised NIOSH lifting equation: a critical evaluation. International Journal of Occupational Safety and Ergonomics, pp.1-8.
9. Khan, S.A. and Hasan, N., 2022. Effect of Wave Instabilities in Thermal and Solutal Mixing of Double-Diffusive Opposed Jets Impinging in a Passive-Mixer. Journal of Heat Transfer, 144(1).
10. Shamim, F.A., Dvivedi, A. and Kumar, P., 2022. Fabrication and characterization of Al6063/SiC composites using electromagnetic stir casting process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(1), pp.187-193.
11. Abdullah, A., Ahmad, S., Athar, M.A., Rajpoot, N. and Talib, F., 2022. Healthcare performance management using integrated FUCOM‐MARCOS approach: The case of India. The International Journal of Health Planning and Management.
12. Muaz, M., Kumar, R. and Choudhury, S.K., 2022. Enhancing tribo-rheological performance of solid lubricants mixed bio-based emulsions applied through minimum quantity cooling lubrication technique. Sādhanā, 47(3), pp.1-15.
13. Khan, S.A., Siddiqui, M.A., Khan, Z.A., Asjad, M. and Husain, S., 2022. Numerical investigation and implementation of the Taguchi based entropy-ROV method for optimization of the operating and geometrical parameters during natural convection of hybrid nanofluid in annuli. International Journal of Thermal Sciences, 172, p.107317.
14. Gani, A., Bhanot, N., Talib, F. and Asjad, M., 2022. An integrated DEMATEL-MMDE-ISM approach for analyzing environmental sustainability indicators in MSMEs. Environmental Science and Pollution Research, 29(2), pp.2035-2051.
15. Faheem, A., Tyagi, A., Pandey, S.M., Hasan, F. and Murtaza, Q., 2022. A sustainable ecofriendly additive manufacturing approach of repairing and coating on the substrate: cold spray. Australian Journal of Mechanical Engineering, pp.1-18.
16. Sinha, A., Zunaid, M., Tokas, S. and Ansari, M.A., 2022. Numerical study of microscale passive mixing in a 3-Dimensional spiral mixer design. Materials Today: Proceedings, 56, pp.851-856.
17. Junaid Khan, R.A., Zubair, M. and Yahya, S.M., Energy and Life Cycle Assessment of Zinc/Water Nanofluid Based Photovoltaic Thermal System.
18. Shariff, S.M., Alam, M.S., Rafat, Y., Ahmad, F. and Khan, M.I., 2022. Utilization of human to nanogrid to support the energy storage system. Energy Storage, 4(1), p.e282.
19. Hussain, T., 2022. Optimization and comparative performance analysis of conventional and desiccant air conditioning systems regenerated by two different modes for hot and humid climates: Experimental investigation. Energy and Built Environment.
20. Hussain, T., 2022. Experimental Analysis and Performance Evaluation of Solid Desiccant Dehumidifier Using Silica Gel.
21. Alam, Z. and Hussain, T., 2022. Experimental Exploration on Performance Advancement of Solid Desiccant Dehumidifier. In IOP Conference Series: Materials Science and Engineering (Vol. 1224, No. 1, p. 012011). IOP Publishing.
22. Hussain, T., Ahmad, A., Hidayat, N., Ahamad, D., Anwar, M.S. and Ahmed, S.I., 2022. Dehumidification Analysis of Rotary Solid Desiccant Wheel System for different Surface Materials. In IOP Conference Series: Materials Science and Engineering (Vol. 1224, No. 1, p. 012015). IOP Publishing.
23. Hussain, T., 2022. Effects of different air inlet temperatures and regeneration air inlet velocities on the performance of Hybrid Desiccant Air Conditioning System. In IOP Conference Series: Materials Science and Engineering (Vol. 1224, No. 1, p. 012012). IOP Publishing.
24. Hussain, T., 2022. Performance evaluation of hybrid desiccant air conditioning system regenerated by waste heat from air cooled condenser: Experimental Investigation. In IOP Conference Series: Materials Science and Engineering (Vol. 1224, No. 1, p. 012014). IOP Publishing.
25. Mustafa, J., Alqaed, S., Sharifpur, M. and Husain, S., 2022. The effect of using multichannel twisted tape and nanofluid on the absorber tube's heat transfer and the efficiency of a linear parabolic solar collector. Sustainable Energy Technologies and Assessments, 52, p.102329.
26. Mustafa, J., Alqaed, S., Aybar, H.Ş. and Husain, S., 2022. Investigation of the effect of twisted tape turbulators on thermal-hydraulic behavior of parabolic solar collector with polymer hybrid nanofluid and exergy analysis using numerical method and ANN. Engineering Analysis with Boundary Elements, 144, pp.81-93.
27. Mustafa, J., Husain, S., Khan, U.A. and Akhtar, M.M., Prediction of diffuse solar radiation using machine learning models based on sunshine period and sky‐clearness index for the humid‐subtropical climate of India. Environmental Progress & Sustainable Energy, p.e13973.
28. Qamareen, A., Ansari, M.A. and Alam, S.S., 2022. Mixing enhancement using the aiding and opposing flow effects in curved micro channel. Chemical Engineering and Processing-Process Intensification, 176, p.108945.
29. Qamareen, A., Ansari, M.A., Alam, S.S. and Alazzam, A., 2022. Modulation of secondary flows in curved serpentine micromixers. Chemical Engineering Communications, 209(5), pp.648-667.
30. Faheem, A., Tyagi, A., Hasan, F., Khan, A.A., Murtaza, Q. and Saxena, K.K., 2022. Residual stress investigation in the metallic coating approach of micro-sized particles on the substrate: cold spray additive manufacturing. Advances in Materials and Processing Technologies, pp.1-17.
31. Ahmad, S. and Muzammil, M., 2022. Predicting the load constant of the revised NIOSH lifting equation based on demographics. International Journal of Occupational Safety and Ergonomics, pp.1-9.
32. Arif, U., Ali Khan, I. and Hassan, F., 2022. Green and sustainable electric discharge machining: a review. Advances in Materials and Processing Technologies, pp.1-75.
33. Ahmad, S., Ali, M., Khan, Z.A. and Asjad, M., 2022. Investigating the effect of input variables on the performance of FMS followed by multi-response optimization: A simulation study. Materials Today: Proceedings.
34. Ahmad, H., Hasan, N. and Sanghi, S., 2022. On the influence of co-flow on the shocks and vortex rings in the starting phases of under-expanded jets. Physics of Fluids, 34(7), p.076117.
35. Zafar, M.R. and Basu, S., 2022. Stiffness and toughness of soft, liquid reinforced composites. Journal of the Mechanics and Physics of Solids, 159, p.104714.
36. Jamil, M.A. and Khanam, S., 2022. Fault Classification of Rolling Element Bearing in Machine Learning Domain. INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION, 27(2), pp.77-90.
37. Mufazzal, S., Muzakkir, S.M. and Khanam, S., 2022. Enhancing the Classification Performance of Machine Learning Techniques by Using Hjorth's and Other Statistical Parameters for Precise Tracking of Naturally Evolving Faults in Ball Bearings. International Journal of Acoustics & Vibration, 27(2).
38. Rehman, S., Nafis, M.S., Waheed, M.A. and Khan, A.A., 2022. Experimental Investigation On Combustion and Performance Characteristics Of A Direct-Injection Diesel Engine. International Journal of Energy for a Clean Environment, 23(6).
1. S Zafar, M Adil, M
Azhar, MA Siddiqui, 2021, Experimental and numerical study of Pool boiling and
critical heat flux enhancement using water based silica Nanofluids,Heat and
Mass Transfer, 1-15.
2. S Husain, SA Khan, MA Siddiqui, 2021,Wall boiling of Al2O3-water nanofluid: Effect of nanoparticle concentration,Progress in Nuclear Energy 133, 103614
3. M Azhar, MA Siddiqui, 2021,Energy and exergy optimisation of parallel flow direct and indirect fired triple effect vapour absorption systems,International Journal of Exergy, 34 (4), 385-410
4. M Adil, A Khan, A Gupta, S Ahmad, MA Siddiqui, 2021, Experimental and Numerical Studies of Heat Transfer Through Heat Sinks in Electronic Devices,Advances in Systems Engineering, 299-307.
5. O Khawar, MF Baig, S Sanghi, 2021,Taylor–Couette flows undergoing orthogonal rotation subject to thermal stratification, Physics of Fluids 33 (3), 035107.
6. S Bhardwaj, AA Khan, M Muzammil, 2021,Lower limb rehabilitation using multimodal measurement of sit-to-stand and stand-to-sit task, Disability and Rehabilitation: Assistive Technology 16 (5), 438-445.
7.S Bhardwaj, AA Khan, M Muzammil, 2021,Lower limb rehabilitation robotics: The current understanding and technology,Work, 1-19.
8. R Khan, M Muzammil, O Farooq, 2021,Design and fabrication of active noise control system for a grass cutter,Noise & Vibration Worldwide 52 (4-5), 86-92.
9.A Rafi, HY Li, NKB Abidin, MK Rana, M Muzammil, S Rizvi, 2021,Audit of the appropriate prescribing of Low Molecular Weight Heparin in a busy Regional Hospital,IRISH JOURNAL OF MEDICAL SCIENCE 190 (SUPPL 1), S39-S40.
10. S Bhardwaj, AA Khan, M Muzammil, 2021,Data Acquisition System for Measurement of Biomechanical Variables in Sit-to-Stand Task,Recent Advances in Mechanical Engineering, 99-105.
11. MF Khan, S Siddiqui, Q Zia, E Ahmad, A Jafri, M Arshad, A Jamal, ..., 2021,Characterization and in vitro cytotoxic assessment of zinc oxide nano-particles in human epidermoid carcinoma cells,Journal of Environmental Chemical Engineering 9 (4), 105636.
12. RK Yadav, Z Hasan, AH Ansari, 2021,Development of Hybrid Nanocomposites by Stir Casting Technique Using Two-Step Mixing,Recent Advances in Mechanical Engineering, 353-359.
13. MR Arif, MA Khan, M Azhar, N Akhtar, M Meraj, 2021,Thermal Performance Comparison and Augmentation of Two Identical Box-Type Solar Cookers Operating in Tropical Climatic Conditions,Journal of Thermal Science and Engineering Applications 13 (6), 061004.
14. S Ahmad, ZA Khan, M Ali, M Asjad, 2021,Geometric and harmonic means based priority dispatching rules for single machine scheduling problems,International Journal of Production Management and Engineering.
15. S Ahmad, A Akber, ZA Khan, M Ali, 2021,Selection of Best Dispatching Rule for Job Sequencing Using Combined Best–Worst and Proximity Index Value MethodsAdvances in Manufacturing and Industrial Engineering, 783-792.
16. S Ahmad, M Ali, ZA Khan, 2021,A Simulation-Based Study for Multi-response Optimization of FMS Performance Measures Using Combined Grey Relational and Principal Component Analyses,Recent Advances in Mechanical Engineering, 275-281.
17. MR Arif, N Hasan, 2021,Effect of free-stream inclination and buoyancy on flow past a square cylinder in large-scale heating regime,Physics of Fluids 33 (7), 073601.
18. HH Khan, SF Anwer, N Hasan, S Sanghi, 2021,Laminar to turbulent transition in a finite length square duct subjected to inlet disturbance,Physics of Fluids 33 (6), 065128.
19. R Kumar, R Sharma, V Kumar, AA Khan, 2021,Predictors of Whole-Body Vibration Exposure among Indian Bus and Truck Drivers,Journal of Physics: Conference Series 1854 (1), 012033.
20. SM Khan, AA Khan, O Farooq, 2021,EMG based classification for pick and place task, Biomedical Physics & Engineering Express 7 (3), 035021.
21. FH Abdalsadah, F Hasan, Q Murtaza, AA Khan, 2021,Design and manufacture of a custom ankle–foot orthoses using traditional manufacturing and fused deposition modeling,Progress in Additive Manufacturing, 1-16.
22. M Mukhtar Alam, A Ali Khan, 2021,Electromyography-based Fatigue Assessment During Endurance Testing by Different Vibration Training Protocols,Iranian Rehabilitation Journal 19 (1), 85-98.
23. SM Khan, AA Khan, O Farooq, 2021,Application of Wavelet Denoising for Phasic Classification in Pick and Place Task,Advances in Interdisciplinary Engineering, 609.
24. AM Mukhtar, AK Abid, F Mohd, 2021,Effects of Different Vibration Therapy Protocols on Neuromuscular Performance,Muscles, Ligaments & Tendons Journal (MLTJ) 11 (1).
25. M Parvez, AA Khan, 2021,Assessment of ergonomic risk factors in occupational motorcycle riding: an experimental investigation,Int. J. Human Factors and Ergonomics 8 (1), 1-21.
26. M Mukhtar Alam, AA Khan, M Farooq, 2021,Effects of vibratory massage therapy on grip strength, endurance time and forearm muscle performance,Work, 1-14.
27. M Parvez, AA Khan, S Bhardwaj, 2021,Muscular Discomfort in Occupational Motorcycle Riding,Recent Advances in Mechanical Engineering, 53-59.
28. SM Khan, AA Khan, O Farooq, 2021,A Neural Network-Based Classification for Finger Motion While Grasping Different Sized Objects,Recent Advances in Mechanical Engineering, 113-118.
29. A Agarwal, H Irtaza, MJ Ahmad, 2021,Numerical analysis of the ground-mounted solar PV panel array mounting systems subjected to basic wind for optimum design,Canadian Journal of Civil Engineering 48 (6), 656-668.
30. A Qamareen, MA Ansari, SS Alam, A Alazzam, 2021,Modulation of secondary flows in curved serpentine micromixers,Chemical Engineering Communications, 1-20.
31. A Qamareen, SS Alam, MA Ansari, 2021,Effect of Wall Fin Aspect Ratio in a Suddenly Expanded Micro-Combustor,Advances in Fluid and Thermal Engineering, 805-812.
32. S Rehman, SS Alam, 2021,Soot Formation Characteristics of Homogeneous Supercritical Fuel Spray of Dieseline Blend,Advances in Fluid and Thermal Engineering, 67-76.
33. SS Alam, S Rehman, A Varshney, 2021,Numerical Study of Gas Turbine Type Continuous Combustion Unit Burning LPG Mixture,Advances in Fluid and Thermal Engineering, 55-65.
33. Roshan Samuel, Shashwat Bhattacharya, Ali Asad, Soumyadeep Chatterjee, Mahendra K Verma, Ravi Samtaney, Syed Fahad Anwer, 2021,SARAS: A general-purpose PDE solver for fluid dynamics,Journal of Open Source Software 6 (64), 2095.
34. A Saood, ZA Khan, MT Parvez, AH Khan, 2021,On the Large Amplitude Forced Vibration Analysis of Composite Sectorial Plates,Journal of Composites Science 5 (3), 83.
35. M Muzammil, AA Khan, F Hasan, 2021,Ergonomics for Improved Productivity,DOI: 10.1007/978-981-15-9054-2. Springer Singapore.
36. A Gani, N Bhanot, F Talib, M Asjad, 2021,An integrated DEMATEL-MMDE-ISM approach for analyzing environmental sustainability indicators in MSMEs,Environmental Science and Pollution Research, 1-17.
37. A Gani, M Asjad, F Talib, ZA Khan, AN Siddiquee, 2021,Identification, ranking and prioritisation of vital environmental sustainability indicators in manufacturing sector using pareto analysis cum best-worst method,International Journal of Sustainable Engineering, 1-19.
38. A Ahmad, SA Zaheen, I Ahmad, F Talib, 2021,Cockpit Design of a Formula Student Race Car: An Ergonomics Study,Ergonomics for Improved Productivity, 679-689.
39. AA Al-Subaie, M Faisal, B Aouni, F Talib, 2021,A Strategic Framework for Transformational Leadership Development in Megaprojects,Sustainability 13 (6), 3480.
40. F Talib, Z Rahman, 2021,Measuring TQM Awareness in Indian Hospitality Industry,Operations Management and Systems Engineering, 45-60.
41. Maheshwari, G., Saraswat, V. K., Kumar, J., Alam, Z., & Hafiz, A. (2021). Temperature profile and Thermal Performance of Boiling Water reactor based power plant (IRJET) e-ISSN: 2395-0056 Volume: 08 Issue: 07 Jul 2021 www.irjet.net p-ISSN: 2395-007.
42. Hussain, T., Kamal, M. A., & Hafiz, A. (2021). Comparative analysis of apple and orange during forced convection cooling: experimental and numerical investigation. AIMS Energy, 9(2), 193-212.
43. Hussain, T., Alam, Z., Ahamad, D., Anwar, M. S., Ahmed, S. I., & Hafiz, A. Dehumidification Analysis of Rotary Solid Desiccant Wheel & Packed Bed System. D.O.I - 10.51201/Jusst12670 http://doi.org/10.51201/Jusst12670, Volume 23, Issue 3, March - 2021 Page-195.
44. Javed, S. F., Zunaid, M., & Ansari, M. A. (2021). Mathematical Analysis of a Spiral Passive Micromixer. In Recent Advances in Mechanical Engineering (pp. 805-812). Springer, Singapore.
45. Tokas, S., Zunaid, M., & Ansari, M. A. (2021). Numerical investigation of the performance of 3D‐helical passive micromixer with Newtonian fluid and non‐Newtonian fluid blood. Asia‐Pacific Journal of Chemical Engineering, 16(1), e2570.
46. Noor, H., Ali, F., & Rafat, Y. (2021). Voice as a Parameter to Assess Mizāj. In Recent Developments in Acoustics (pp. 3-15). Springer, Singapore.
47. Srivastava, N., & Rafat, Y. (2021). Acoustic Streaming in a Porous Media. In Recent Developments in Acoustics (pp. 173-181). Springer, Singapore.
48. Parashar, N., Aslfattahi, N., Yahya, S. M., & Saidur, R. (2021). An artificial neural network approach for the prediction of dynamic viscosity of MXene-palm oil nanofluid using experimental data. Journal of Thermal Analysis and Calorimetry, 144(4), 1175-1186.
49. Rahman, Wasi Ur, Syed Mohd Yahya, Zahid A. Khan, Naseem Ahmad Khan, Gopinath Halder, and Sumit H. Dhawane. "Valorization of waste chicken egg shells towards synthesis of heterogeneous catalyst for biodiesel production: Optimization and statistical analysis." Environmental Technology & Innovation 22 (2021): 101460.
50. Parashar, Naman, Navid Aslfattahi, Syed Mohd Yahya, and R. Saidur. "ANN Modeling of Thermal Conductivity and Viscosity of MXene-Based Aqueous IoNanofluid. " International Journal of Thermophysics 42, no. 2 (2021): 1-24.
51. Parashar, Naman, and Syed Mohd Yahya. "Thermophysical and rheological properties of hybrid nanofluids: a review on recent studies." Journal of Thermal Analysis and Calorimetry (2021): 1-39.
52. Bakthavatchalam, Balaji, Khairul Habib, R. Saidur, Navid Aslfattahi, Syed Mohd Yahya, A. Rashedi, and Taslima Khanam. "Optimization of thermophysical and rheological properties of mxene ionanofluids for hybrid solar photovoltaic/thermal systems." Nanomaterials 11, no. 2 (2021): 320.
53. Zubair, Mohd Muzammil, Md Seraj, Mohd Faizan, Mohd Anas, and Syed Mohd Yahya. "Experimental study on heat transfer of an engine radiator with T i O 2/EG-water nano-coolant." SN Applied Sciences 3, no. 4 (2021): 1-9.
54. Yahya, S. M., Y. Abdulmumin, T. M. Abdulmumin, B. S. Sagagi, M. Murtala, A. K. Salau, and S. A. Hassan. "Biological Synthesis, Characterization and Antimicrobial effect of Silver Nanoparticles (Ag-NPs) using Aqueous Extract of Mango Pulp (Mangifera indica)." Journal of Complementary and Alternative Medical Research (2021): 39-50.
55. Beg, M. Shariq, and M. Yaqoob Yasin. "Bending, free and forced vibration of functionally graded deep curved beams in thermal environment using an efficient layerwise theory." Mechanics of Materials 159 (2021): 103919.
56. Beg, Mirza S., Hasan M. Khalid, Mohd Y. Yasin, and L. Hadji. "Exact third-order static and free vibration analyses of functionally graded porous curved beam." Steel and Composite Structures 39, no. 1 (2021): 1-20.
57. Zafar, M. Rashid, and Sumit Basu. "Calibrating surface hyperelastic constitutive models in soft solids." Physical Review E 103, no. 6 (2021): 063003.
58. Hussain, Taliv, Waquar Ahmad, and Intekhab Quadri. "Performance Evaluation of a Vapor Compression Refrigeration System Using Oxide Nano-particles: Experimental Investigation." Nanoscience & Nanotechnology-Asia 11, no. 2 (2021): 189-196.
59. Mufazzal, Sameera, S. M. Muzakkir, and Sidra Khanam. "Numerical Investigation of the Effect of Ball Bearing Geometry on Oil Film Damping Due to Lubricated Contact at Different Loads." In Advances in Mechanical Engineering, pp. 11-23. Springer, Singapore, 2021.
60. Khanam, Sidra, and N. Tandon. "Investigations into Some Parameters of Vibration Signal of Faulty Bearings with Wavelet Transform." In Recent Developments in Acoustics, pp. 251-262. Springer, Singapore, 2021.
61. Gautam, Swati, Sidra Khanam, and N. Tandon. "Dynamic Analysis for Healthy and Defective Gears: A Review." Recent Developments in Acoustics (2021): 193-205.
62. Khan, Sanan H., Ateeb Ahmad Khan, and Afsar Husain. "Effect of fibre orientation on damage resistance of composite laminates." International Journal of Crashworthiness 26, no. 3 (2021): 270-282.
63. Usmani, Abdullah Y., and K. Muralidhar. "Unsteady Hemodynamics in Intracranial Aneurysms With Varying Dome Orientations." Journal of Fluids Engineering 143, no. 6 (2021): 061206.
64. Owais, Mohammad, Abdullah Y. Usmani, and Krishnamurthy Muralidhar. "Imaging spatial and temporal flow characteristics in a curved asymmetric stenosed arterial model." in Astfe Digital Library. Begel House Inc., 2021.
65. Husain, Shahid, Md Adil, Mohammad Arqam, and Bahman Shabani. "A review on the thermal performance of natural convection in vertical annulus and its applications." Renewable and Sustainable Energy Reviews 150 (2021): 111463.
66. Farhan Ahmad Shamim, Akshay Dvivedi & Pradeep Kumar (2021) “On near-dry wire ECDM of Al6063/SiC/10p MMC”, Materials and Manufacturing Processes, 36:1, 122-134. DOI: 10.1080/10426914.2020.1802044.
2020 Publications
1. Varshney, M., Varshney, A. and Baig, F.M., 2020. Incrementation of Lift-to-Drag Ratio for a Wing Using Thermal Forcing. In AIAA Scitech 2020 Forum (p. 1321).
2. Varshney, M., Baig, F.M. and Hasan, N., 2020. Turbulent Drag Reduction on an Aircraft Wing by Wall Jets for Flow Control. In AIAA Scitech 2020 Forum (p. 1320).
3. Varshney, A., Varshney, M. and Baig, F.M., 2020. Control of Unstart Phenomenon in a Hydrogen Fuelled Scramjet Engine. In AIAA Scitech 2020 Forum (p. 2055).
4. Ashraf, M., Muzammil, M. and Khan, A.A., 2020. Design and evaluation of a feed handle for a bench drilling machine. Work, (Preprint), pp.1-8.
5. Faizan, M.S. and Muzammil, M., 2020. Hand tremor suppression device for patients suffering from Parkinson’s disease. Journal of medical engineering & technology, 44(4), pp.190-197.
6. Bhardwaj S, Khan AA, Muzammil M, Khan SM. ANN based classification of sit to stand transfer. Materials Today: Proceedings. 2020 Jan 1;24:1029-34.
7. Mustafa, J., Alqaed, S. and Siddiqui, M.A., 2020. Thermally Driven Flow of Water in Partially Heated Tall Vertical Concentric Annulus. Entropy, 22(10), p.1189.
8. Azhar, M. and Siddiqui, M.A., 2020. Comprehensive exergy analysis and optimization of operating parameters for double effect parallel flow absorption refrigeration Cycle. Thermal Science and Engineering Progress, 16, p.100464.
9. Khan, S.A., Siddiqui, M.A. and Husain, S., 2020. Numerical Studies on Thermally Induced Flow of Nanofluid in a Vertical Annulus. In Proceedings of International Conference in Mechanical and Energy Technology (pp. 87-100). Springer, Singapore.
10. Mohammed, A.K., Alam, M.N. and Ansari, R., 2020. Buckling analysis of thin cylindrical CFRP panel with oval cutout. Materials Today: Proceedings, 21, pp.1270-1277.
11. Alam, M.A., Hamdan, H.Y., Azeem, M., Hussain, P.B., bin Salit, M.S., Khan, R., Arif, S. and Ansari, A.H., 2020. Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: a comparative study. Journal of Materials Research and Technology, 9(6), pp.14036-14050.
12. Shaikh, M.B.N., Aziz, T., Arif, S., Ansari, A.H., Karagiannidis, P.G. and Uddin, M., 2020. Effect of sintering techniques on microstructural, mechanical and tribological properties of Al-SiC composites. Surfaces and Interfaces, 20, p.100598.
13. Yadav, R.K., Hasan, Z. and Ansari, A.H., 2020. Investigation of mechanical and wear behavior of Al based SiC reinforce metal matrix composite. Materials Today: Proceedings, 21, pp.1537-1543.
14. Arif, M.R. and Hasan, N., 2020. Large-scale heating effects on global parameters for flow past a square cylinder at different cylinder inclinations. International Journal of Heat and Mass Transfer, 161, p.120237.
15. Khan, M.A., Anwer, S.F., Khan, S.A. and Hasan, N., 2020. Hydrodynamic and heat transfer characteristics of vortex-induced vibration of square cylinder with various flow approach angle. International Journal of Thermal Sciences, 156, p.106454.
16. Arif, M.R. and Hasan, N., 2020. Effect of Thermal Buoyancy on Vortex-Shedding and Aerodynamic Characteristics for Fluid Flow Past an Inclined Square Cylinder. Journal homepage: http://iieta. org/journals/ijht, 38(2), pp.463-471.
17. Ali, R. and Hasan, N., 2020. Steady and unsteady flow regimes in two-dimensional mixed convective flow of air past a heated square cylinder. International Journal of Mechanical Sciences, 175, p.105533.
18. Khan, H.H., Anwer, S.F., Hasan, N. and Sanghi, S., 2020. Dynamics of coherent structures in turbulent square duct flow. Physics of Fluids, 32(4), p.045106.
19. Khan, H.H., Anwer, S.F., Hasan, N. and Sanghi, S., 2020. The organized motion of characterized turbulent flow at low Reynolds number in a straight square duct. SN Applied Sciences, 2(4), pp.1-13.
20. Khan, S.A., Shahzer, M.A. and Hasan, N., 2020. 2-D numerical study of effect of Reynolds number on double-diffusive jet interaction in a passive mixture. Materials Today: Proceedings, 25, pp.848-856.
21. Alam, M.M., Khan, A.A. and Farooq, M., 2020. Effects of whole-body vibration on muscle strength, balance and functional mobility in patients with multiple sclerosis: A systematic review and Meta-analysis. Journal of Musculoskeletal Research.
22. Alam, M.M., Khan, A.A. and Farooq, M., 2020. Effects of vibration therapy on neuromuscular efficiency & features of the EMG signal based on endurance test. Journal of Bodywork and Movement Therapies, 24(4), pp.325-335.
23. AK, M., Alam, M.N. and Ansari, R., 2020. Quasi-static study of thin aluminium frusta with linearly varying wall-thickness. International Journal of Crashworthiness, 25(5), pp.473-484.
24. Rafi, S.S., Alam, M.N. and ur Rahman, N., 2020. Modelling and Analysis of Skew Hybrid Sandwich Plate. In Proceedings of International Conference in Mechanical and Energy Technology (pp. 589-596). Springer, Singapore.
25. Chanthawong, A., Dhakal, S., Kuwornu, J.K. and Farooq, M.K., 2020. Impact of subsidy and taxation related to biofuels policies on the economy of Thailand: A dynamic CGE modelling approach. Waste and Biomass Valorization, 11(3), pp.909-929.
26. Agarwal, A., Irtaza, H. and Ahmad, M.J., 2020. Numerical analysis of the ground-mounted solar PV panel array mounting systems subjected to basic wind for optimum design. Canadian Journal of Civil Engineering, (ja).
27. Rehman, S. and Alam, S.S., 2020. Combustion and soot formation characteristics of homogeneous supercritical sprays of dieseline blend in constant volume chamber. AIMS Energy, 8(5), p.959.
28. Alam, S.S., Rehman, S. and Hassan, N., 2020. Evaluation of thermal properties of commercial fuels at high pressure and temperature through developed computer codes. Engineering Research Express, 2(3), p.035013.
29. Rehman, S. and Alam, S.S., 2020. Rate of Heat Release Characteristics of Supercritical Sprays of Dieseline Blend in Constant Volume Combustion Chamber. Results in Engineering, p.100121.
30. Hussain, T., Agarwal, P. and Hafiz, A., 2020. HVAC Systems and Environmental Controls in Hospital Operation Theatres. In Proceedings of International Conference in Mechanical and Energy Technology (pp. 675-684). Springer, Singapore.
31. Hussain, T. and Hafiz, A., 2020. Exergy Analysis of an Air Conditioning System Using Air-Cooled Condenser at Different Ambient Conditions with Different Volume Flow Rates of Air. In Proceedings of International Conference in Mechanical and Energy Technology (pp. 597-605). Springer, Singapore.
32. Ali, M.M. and Anwer, S.F., 2020. Acoustic Signature of Square Cylinder in a Compressible Flow. In Recent Developments in Acoustics (pp. 231-240). Springer, Singapore.
33. Parvez, M.T., Khan, A.H. and Yasin, M.Y., On the softening and hardening nonlinear behavior of laminated cylindrical shells. Engineering Structures, 226, p.111339.
34. Prakash, B., Yasin, M.Y., Khan, A.H., Asjad, M. and Khan, Z.A., 2020. Optimal location and geometry of sensors and actuators for active vibration control of smart composite beams. Australian Journal of Mechanical Engineering, pp.1-19.
35. Yasin, M.Y., Prakash, B. and Khan, A.H., 2020. Finite element model based on an efficient layerwise theory for dynamics and active vibration control of smart functionally graded beams. Materials Research Express, 7(2), p.025703.
36. Faheem, A., Husain, T., Hasan, F. and Murtaza, Q., 2020. Effect of nanoparticles in cutting fluid for structural machining of Inconel 718. Advances in Materials and Processing Technologies, pp.1-18.
37. Ashraf, M., Gola, A., Hasan, F. and AlArjani, A.S., 2020, March. An Adaptive Algorithm for Multiple Part Families Manufacturing Selection in Reconfigurable Flow Lines. In Asian Conference on Intelligent Information and Database Systems (pp. 133-144). Springer, Singapore.
38. Ahmad, S., Abdullah, A. and Talib, F., 2020. Lean-green performance management in Indian SMEs: a novel perspective using the best-worst method approach. Benchmarking: An International Journal.
39. Talib, F. and Rahman, Z., 2020. Measuring TQM Awareness in Indian Hospitality Industry. In Operations Management and Systems Engineering (pp. 45-60). Springer, Singapore.
40. Talib, F., Asjad, M., Attri, R., Siddiquee, A.N. and Khan, Z.A., 2020. A road map for the implementation of integrated JIT-lean practices in Indian manufacturing industries using the best-worst method approach. Journal of Industrial and Production Engineering, 37(6), pp.275-291.
41. Khanam, S., Talib, F. and Siddiqui, J., 2020. An instrument validation of TQM enablers and IT resources in Indian ICT organizations. Journal of Systems and Information Technology.
42. Talib, F. and Faisal, N., 2016. Assessment of Total Quality Management Implementation in Indian Service Industries. Available at SSRN 2907927.
43. Talib, F. and Rahman, Z., 2020. Modeling the barriers toward the growth of higher education institutions. Qualitative Research Journal.
44. Kushwaha, D. and Talib, F., 2020. Ranking of Barriers to Green Manufacturing Implementation in SMEs Using Best-Worst Method. MS&E, 748(1), p.012017.
45. Atif, M., Siddiqui, J., Talib, F. and Sohail, S.S., 2020. APPLICATIONS OF MACHINE LEARNING TECHNIQUES FOR DISEASE DIAGNOSIS: A REVIEW. Journal of Critical Reviews, 7(17), pp.2652-2661.
46. Tokas, S., Zunaid, M. and Ansari, M.A., 2020. Numerical investigation of the performance of 3D‐helical passive micromixer with Newtonian fluid and non‐Newtonian fluid blood. Asia‐Pacific Journal of Chemical Engineering, p.e2570.
47. Fuwad, A., Hossain, S., Ryu, H., Ansari, M.A., Khan, M.S.I., Kim, K.Y., Jeon, T.J. and Kim, S.M., 2020. Numerical and Experimental Study on Mixing in Chaotic Micromixers with Crossing Structures. Chemical Engineering & Technology, 43(9), pp.1866-1875.
48. Hu, E., Fu, J., Pan, L., Jiang, X., Huang, Z. and Zhang, Y., 2012. Experimental and numerical study on the effect of composition on laminar burning velocities of H2/CO/N2/CO2/air mixtures. international journal of hydrogen energy, 37(23), pp.18509-18519.
49. Assanis, D.N., Filipi, Z.S., Fiveland, S.B. and Syrimis, M., 2003. A predictive ignition delay correlation under steady-state and transient operation of a direct injection diesel engine. J. Eng. Gas Turbines Power, 125(2), pp.450-457.
50. Rehman, S., Alam, F. and Adil, M., 2020. Ignition and Combustion Characteristics of Impinging Diesel and Biodiesel Blended Sprays Under Diesel Engine-Like Operating Conditions. In Proceedings of International Conference in Mechanical and Energy Technology (pp. 719-728). Springer, Singapore.
51. Varshney, M. and Usmani, A., 2020. Flow dynamics in an aneurysm: Effect of prolonged exercise. Bulletin of the American Physical Society, 65.
52. Varshney, M., Farooqi, M.H. and Usmani, A.Y., 2020. Quantifying hemodynamics within an aneurysm exposed to prolonged exercise levels. Computer Methods and Programs in Biomedicine, 184, p.105124.
53. Khanam, S. and Tandon, N., 2020. Investigations into Some Parameters of Vibration Signal of Faulty Bearings with Wavelet Transform. In Recent Developments in Acoustics (pp. 251-262). Springer, Singapore.
54. Gautam, S., Khanam, S. and Tandon, N., 2020. Dynamic Analysis for Healthy and Defective Gears: A Review. Recent Developments in Acoustics, pp.193-205.
55. Khan, S.H., Agnihotri, S.K., Khan, A.A. and Husain, A., 2020. Finite Element Modeling and Simulation of Projectile Impact on Ductile Target. In Recent Advances in Mechanical Engineering (pp. 429-437). Springer, Singapore.
56. Faheem, A., Husain, T., Hasan, F. and Murtaza, Q., 2020. Effect of nanoparticles in cutting fluid for structural machining of Inconel 718. Advances in Materials and Processing Technologies, pp.1-18.
57. Hussain, T., Javed, M.T. and Ansari, R.I., 2020. A Review on Heat Transfer Enhancement Using Magnetic Nanofluids. Nanoscience & Nanotechnology-Asia, 10(3), pp.266-278.
58. Hussain, T. and Ansari, S., 2020. Free and Forced Air Precooling of Perishable Food Products: Experimental Investigation. Advanced Science, Engineering and Medicine, 12(4), pp.517-523.
59. Hussain, T. and Ansari, S., 2020. Experimental and Theoretical Investigation of Viscosity of Oxide Nanoparticles Dispersed in Different Carrier Medium. Advanced Science, Engineering and Medicine, 12(3), pp.392-402.
60. Hussain, T., Singh, A.K., Mittal, A., Verma, A. and Alam, Z., 2020. Performance Evaluation of Vapor Compression Refrigeration System by Varying Air Flow Rates in Air-Cooled and Evaporatively Cooled Condensers. International Journal of Energy for a Clean Environment, 21(1).
61. Yasin, M.Y., Khalid, H.M. and Beg, M.S., 2020. Exact solution considering layerwise mechanics for laminated composite and sandwich curved beams of deep curvatures. Composite Structures, p.112258.
62. Yasin, M.Y., Beg, M.S. and Prakash, B., 2020, November. Static shape control of smart functionally graded beams using an efficient finite element model. In AIP Conference Proceedings (Vol. 2273, No. 1, p. 050059). AIP Publishing LLC.
63. Prakash, B., Amir, M., Yasin, M.Y. and Khan, A.H., 2020. Active vibration control of smart laminated beams using PFRC patches as sensors and actuators. Materials Today: Proceedings, 21, pp.1355-1360.
64. Khan, M.A., Yasin, M.Y., Beg, M.S. and Khan, A.H., 2020. Free and Forced Vibration Analysis of Functionally Graded Beams Using Finite Element Model Based on Refined Third-Order Theory. In Emerging Trends in Mechanical Engineering (pp. 603-612). Springer, Singapore.
65. Kumar, P., Chaudhary, D., Varshney, P., Varshney, U., Yahya, S.M. and Rafat, Y., 2020. Critical review on battery thermal management and role of nanomaterial in heat transfer enhancement for electrical vehicle application. Journal of Energy Storage, 32, p.102003.
66. Samylingam, L., Aslfattahi, N., Saidur, R., Yahya, S.M., Afzal, A., Arifutzzaman, A., Tan, K.H. and Kadirgama, K., 2020. Thermal and energy performance improvement of hybrid PV/T system by using olein palm oil with MXene as a new class of heat transfer fluid. Solar Energy Materials and Solar Cells, 218, p.110754.
67. Rubbi, F., Habib, K., Saidur, R., Aslfattahi, N., Yahya, S.M. and Das, L., 2020. Performance optimization of a hybrid PV/T solar system using Soybean oil/MXene nanofluids as A new class of heat transfer fluids. Solar Energy, 208, pp.124-138.
68. Mustafa, U., Qeays, I.A., BinArif, M.S., Yahya, S.M. and Md. Ayob, S.B., 2020. Efficiency improvement of the solar PV-system using nanofluid and developed inverter topology. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, pp.1-17.
69. Parashar, N., Seraj, M., Yahya, S.M. and Anas, M., 2020. Development of an artificial neural network for the prediction of relative viscosity of ethylene glycol based nanofluids. SN Applied Sciences, 2(9), pp.1-9.
70. Seraj, M., Yahya, S.M., Anas, M., Sutrisno, A. and Asjad, M., 2020. Integrated Taguchi-GRA-PCA for optimising the heat transfer performance of nanofluid in an automotive cooling system. Grey Systems: Theory and Application.
71. Das, L., Habib, K., Saidur, R., Aslfattahi, N., Yahya, S.M. and Rubbi, F., 2020. Improved Thermophysical Properties and Energy Efficiency of Aqueous Ionic Liquid/MXene Nanofluid in a Hybrid PV/T Solar System. Nanomaterials, 10(7), p.1372.
72. Qeays, I.A., Yahya, S.M., Asjad, M. and Khan, Z.A., 2020. Multi-performance optimization of nanofluid cooled hybrid photovoltaic thermal system using fuzzy integrated methodology. Journal of Cleaner Production, 256, p.120451.
73. Qeays, I.A., Yahya, S.M., Arif, M.S.B. and Jamil, A., 2020. Nanofluids application in hybrid Photovoltaic Thermal System for Performance Enhancement: A review. AIMS Energy, 8(3), p.365.
74. Parashar, N., Aslfattahi, N., Yahya, S.M. and Saidur, R., 2020. An artificial neural network approach for the prediction of dynamic viscosity of MXene-palm oil nanofluid using experimental data. Journal of Thermal Analysis and Calorimetry.
75. Danish, M., Yahya, S.M. and Saha, B.B., 2020. Modelling and optimization of thermophysical properties of aqueous titania nanofluid using response surface methodology. Journal of Thermal Analysis and Calorimetry, 139(5), pp.3051-3063.
76. Seraj, M., Yahya, S.M., Badruddin, I.A., Anqi, A.E., Asjad, M. and Khan, Z.A., 2020. Multi-Response Optimization of Nanofluid-Based IC Engine Cooling System Using Fuzzy PIV Method. Processes, 8(1), p.30.
77. Noor, H., Ali, F. and Rafat, Y., Voice as a Parameter to Assess Mizāj. In Recent Developments in Acoustics (pp. 3-15). Springer, Singapore.
78. Srivastava, N. and Rafat, Y., 2020. Acoustic Streaming in a Porous Media. In Recent Developments in Acoustics (pp. 173-181). Springer, Singapore.
79. Shamami, M.S., Alam, M.S., Ahmad, F., Shariff, S.M., AlSaidan, I., Rafat, Y. and Asghar, M.J., 2020. Artificial Intelligence-Based Performance Optimization of Electric Vehicle-to-Home (V2H) Energy Management System. SAE International Journal of Sustainable Transportation, Energy, Environment, & Policy, 1(13-01-02-0007).
80. Ahmad, A., Alam, M.S., Rafat, Y. and Shariff, S., 2020. Designing and demonstration of misalignment reduction for wireless charging of autonomous electric vehicle. eTransportation, 4, p.100052.
81. Ahmad, A., Alam, M.S., Rafat, Y., Shariff, S.M., Al-Saidan, I.S. and Chabaan, R.C., 2020. Foreign Object Debris Detection and Automatic Elimination for Autonomous EV Wireless Charging Application. SAE International Journal of Electrified Vehicles, 9(14-09-02-0006).
2019 Publications
1. AK, M., Alam, M.N. and Ansari, R., 2019. Quasi-static study of thin aluminium frusta with linearly varying wall-thickness. International Journal of Crashworthiness, pp.1-12.
2. Saood, A., Khan, A.H. and Khan, A.A., 2019, July. Comparative Analysis of Non-linear Periodic Response of Cross-ply and Angle-ply Laminated Composite Plates. In Journal of Physics: Conference Series (Vol. 1240(1) p. 012156). IOP Publishing.
3. Farooquie, P., Suhail, A. and Faisal, M.N., 2019. Uncertainty and contract flexibility in automotive supply chains: a simulation model. International Journal of Business Performance and Supply Chain Modelling, 10(3), pp.215-235.
4. Arif, M.R. and Hasan, N., 2019. Vortex shedding suppression in mixed convective flow past a square cylinder subjected to large-scale heating using a non-Boussinesq model. Physics of Fluids, 31(2), p.023602.
5. Tyagi, A., Walia, R.S., Murtaza, Q., Pandey, S.M., Tyagi, P.K. and Bajaj, B., 2019. A critical review of diamond like carbon coating for wear resistance applications. International Journal of Refractory Metals and Hard Materials, 78, pp.107-122.
6. Alam, M.T., Arif, S., Ansari, A.H. and Alam, M.N., 2019. Optimization of wear behaviour using Taguchi and ANN of fabricated aluminium matrix nanocomposites by two-step stir casting. Materials Research Express, 6(6), p.065002.
7. Mohsin, S., Khan, I.A. and Ali, M., 2019. Ergonomics-based working flexibility for automated guided vehicle (AGV) operators. The International Journal of Advanced Manufacturing Technology, pp.1-19.
8. Varshney, A., Khan, A.H., Yasin, M.Y., Khan, Z.A. and Asjad, M., 2019. On the optimal dynamic design of laminated composite folded plates: a multi-criteria decision analysis. Multidiscipline Modeling in Materials and Structures.
9. Khan, A.H. and Patel, B.P., 2019. Nonlinear periodic response of bimodular laminated composite annular sector plates. Composites Part B: Engineering, 169, pp.96-108.
10. Ansari, M.I., Siddique, M.H., Samad, A. and Anwer, S.F., 2019. On the optimal morphology and performance of a modeled dragonfly airfoil in gliding mode. Physics of Fluids, 31(5), p.051904.
11. Arora, L., Bhardwaj, S., Hashmi, G.S., Anwar, S.F. and Rahman, S.A., 2019. Finite Element Analysis (FEA) of Perpendicular Plating Versus Conventional Plating in Mandibular Symphysis Fracture. Journal of Maxillofacial and Oral Surgery, pp.1-6.
12. Jamil, B. and Akhtar, N., 2019. Effect of specific height on productivity and thermal efficiency of a solar still: An experimental approach under indoor environment. Environmental Progress & Sustainable Energy.
13. Khan, S.A., Shahzer, M., Sultan, D. and Ali, R., 2019. Thermal and solutal buoyancy effects on mixing of opposed laminar jets in a two-dimensional passive mixer at a higher Reynolds number. International Journal of Mechanical and Production Engineering Research and Development. 9(3), pp.923-930.
14. Shariff, S.M., Alam, M.S., Ahmad, F., Rafat, Y., Asghar, M.S.J. and Khan, S., 2019. System Design and Realization of a Solar-Powered Electric Vehicle Charging Station. IEEE Systems Journal.
15. Yahya, S.M., Asjad, M. and Khan, Z.A., 2019. Multi-response optimization of TiO2/EG-water nano-coolant using entropy-based preference indexed value (PIV) method. Materials Research Express, 6(8), p.0850a1.
16. Danish, M., Arfin, Z., Jamil, A. and Yahya, S.M., Design, Analysis and Fabrication of A Mini-Sailplane for Didactic Purposes In the Area of Development of UAVs/MAVs. CFD Letters, 11, pp.72-83.
17. Shakya, A., Yahya, S.M., Ansari, M.A. and Khan, S.A., 2019. Role of 1-Butanol on Critical Heat Flux Enhancement of TiO2, Al2O3 and CuO Nanofluids. Journal of Nanofluids, 8(7), pp.1560-1565.
18. Jamil, A. and Varshney, V., 2019. A user-defined subroutine for numerical modelling of failure due to creep under compression in carbon fibre reinforced composite materials. Materials Research Express, 6(8), p.085609.
19. Husain, S., Siddiqui, M.A. and Khan, S.A., 2019. Effect of geometrical parameters on natural convection of water in a narrow annulus. Progress in Nuclear Energy, 112, pp.146-161.
20. Husain, S., Siddiqui, M.A. and Ahmad Khan, S., 2019. Wall boiling in a vertical annulus: Effect of inlet subcooling and mass flow rate. Numerical Heat Transfer, Part A: Applications, 75(11), pp.776-793.
21. Husain, S., Siddiqui, M.A. and Khan, S.A., Visualization of Flow patterns of water in open ended vertical annulus during Natural Convection Flow. Journal of Flow Visualization and Image Processing, 26(3), pp 209-222.
22. Azhar, M. and Siddiqui, M.A., 2019. Exergy analysis of single to triple effect lithium bromide-water vapour absorption cycles and optimization of the operating parameters. Energy conversion and management, 180, pp.1225-1246.
23. Azhar, M. and Siddiqui, M.A., 2019. First and Second Law Analyses of Double Effect Parallel and Series Flow Direct Fired Absorption Cycles for Optimum Operating Parameters. Journal of Energy Resources Technology, 141(12), p.124501.
24. Jamil, B. and Bellos, E., 2019. Development of empirical models for estimation of global solar radiation exergy in India. Journal of cleaner production, 207, pp.1-16.
25. Ali, M. and Jamil, B., 2019. Estimating diffuse solar radiation in India: performance characterization of generalized single-input empirical models. Urban Climate, 27, pp.314-350.
26. Irshad, K., Algarni, S., Jamil, B., Ahmad, M.T. and Khan, M.A., 2019. Effect of gender difference on sleeping comfort and building energy utilization: Field study on test chamber with thermoelectric air-cooling system. Building and Environment, 152, pp.214-227.
27. Irshad, K., Habib, K., Algarni, S., Saha, B.B. and Jamil, B., 2019. Sizing and life-cycle assessment of building integrated thermoelectric air cooling and photovoltaic wall system. Applied Thermal Engineering, 154, pp.302-314.
28. Anis, M.S., Jamil, B., Ansari, M.A. and Bellos, E., 2019. Generalized models for estimation of global solar radiation based on sunshine duration and detailed comparison with the existing: A case study for India. Sustainable Energy Technologies and Assessments, 31, pp.179-198.
29. Sharma, A.P., Khan, S.H. and Parameswaran, V., 2019. Response and failure of fiber metal laminates subjected to high strain rate tensile loading. Journal of Composite Materials, 53(11), pp.1489-1506.
30. Khan, S.H. and Sharma, A.P., 2019. Failure assessment of fiber metal laminates based on metal layer dispersion under dynamic loading scenario. Engineering Failure Analysis, 106, p.104182.
31. Sharma, A.P., Khan, S.H. and Velmurugan, R., 2019. Effect of through thickness separation of fiber orientation on low velocity impact response of thin composite laminates. Heliyon, 5(10), p.e02706.
32. Alam, Z., Iqbal, F., Ganesan, S. and Jha, S., 2019. Nanofinishing of 3D surfaces by automated five-axis CNC ball end magnetorheological finishing machine using customized controller. The International Journal of Advanced Manufacturing Technology, 100(5-8), pp.1031-1042.
33. Kumar, A., Alam, Z., Khan, D.A. and Jha, S., 2019. Nanofinishing of FDM-fabricated components using ball end magnetorheological finishing process. Materials and Manufacturing Processes, 34(2), pp.232-242.
34. Alam, Z., Khan, D.A. and Jha, S., 2019. MR fluid-based novel finishing process for nonplanar copper mirrors. The International Journal of Advanced Manufacturing Technology, 101(1-4), pp.995-1006.
35. Iqbal, F., Alam, Z., Khan, D.A. and Jha, S., 2019. Constant work gap perpetuation in ball end magnetorheological finishing process. International Journal of Precision Technology, 8(2-4), pp.397-410.
36. Khan, D.A., Alam, Z., Iqbal, F. and Jha, S., 2019. Experimental investigations on the effect of relative particle sizes of abrasive and iron powder in polishing fluid composition for ball end MR finishing of copper. International Journal of Precision Technology, 8(2-4), pp.354-364.
37. Alam, Z., Khan, D.A., Iqbal, F. and Jha, S., 2019. Effect of polishing fluid composition on forces in ball end magnetorheological finishing process. International Journal of Precision Technology, 8(2-4), pp.365-378.
2018 Publications
1. Ansari, A.K., Khan, Z.A. and Khan, A.A., 2018. Vibration monitoring of rotor bearing system using MFS-lite. Vibroengineering PROCEDIA, 21, pp.8-13.
2. Alam, M.M., Khan, A.A. and Farooq, M., 2018. Effect of whole-body vibration on neuromuscular performance: A literature review. Work, 59(4), pp.571-583.
3. Bhardwaj, S. and Khan, A.A., 2018. Ergonomics investigation for orientation of the handles of wood routers. International Journal of Occupational Safety and Ergonomics, 24(4), pp.592-604.
4. Rahman, N., Alam, M.N. and Junaid, M., 2018. Active vibration control of composite shallow shells: An integrated approach. Journal of Mechanical Engineering and Sciences, 12(1), pp.3354-3369.
5. Arif, S., Alam, M.T., Ansari, A.H., Shaikh, M.B.N. and Siddiqui, M.A., 2018. Analysis of tribological behaviour of zirconia reinforced Al-SiC hybrid composites using statistical and artificial neural network technique. Materials Research Express, 5(5), p.056506.
6. Arif, S., Alam, M.T., Aziz, T. and Ansari, A.H., 2018. Morphological and wear behaviour of new Al-SiCmicro-SiCnano hybrid nanocomposites fabricated through powder metallurgy. Materials Research Express, 5(4), p.046534.
7. Alam, M.T., Arif, S. and Ansari, A.H., 2018. Wear behaviour and morphology of stir cast aluminium/SiC nanocomposites. Materials Research Express, 5(4), p.045008.
8. Khan, A.H., Parvez, M. and Yasin, M.Y., 2018. Non-Linear Forced Vibration of Cylindrical Shell Panels. Advanced Science, Engineering and Medicine, 10(3-4), pp.496-499.
9. Yasin, M.Y., Kumar, P., Prakash, B. and Khan, A.H., 2018. Nonlinear Response of Piezoelectric Curved Actuators at High Applied Electric Fields. Advanced Science, Engineering and Medicine, 10(3-4), pp.403-407.
10. Khan, N. and Qamareen, A., 2018. Analysis of Adiabatic Flame Temperature for different Alkane-Air Mixtures using Simulink Model,5(3), pp 1202-1210.
11. Ashraf, M. and Hasan, F., 2018. Configuration selection for a reconfigurable manufacturing flow line involving part production with operation constraints. The International Journal of Advanced Manufacturing Technology, 98(5-8), pp.2137-2156.
12. Yaqoob Yasin, M. and Kapuria, S., 2018. Influence of piezoelectric nonlinearity on active vibration suppression of smart laminated shells using strong field actuation. Journal of Vibration and Control, 24(3), pp.505-526.
13. Singh, A. and Ali, R., 2018. Effect of Buoyancy and Inertia Forces on the Flow Past a Heated Square Cylinder in Cross Flow Configuration. Advanced Science, Engineering and Medicine, 10(3-4), pp.505-512.
14. Asaad, M., Ahmad, F., Alam, M.S. and Rafat, Y., 2018. IoT enabled monitoring of an optimized electric vehicles battery system. Mobile Networks and Applications, 23(4), pp.994-1005.
15. Alam, M.S., Ahmad, A., Khan, Z.A., Rafat, Y., Chabaan, R.C., Khan, I. and Al-Shariff, S.M., 2018. A bibliographical review of electrical vehicles (xEVs) standards. SAE International Journal of Alternative Powertrains, 7(08-07-01-0005), pp.63-98.
16. Chaudhary, G., Shrivastava, P., Alam, M.S. and Rafat, Y., 2018. Performance optimization and development of an efficient solar photovoltaic based inverter air conditioning system. Smart Science, 6(2), pp.188-196.
17. Ansari, S., Hussain, T., Yahya, S.M., Chaturvedi, P. and Sardar, N., 2018. Experimental investigation of viscosity of nanofluids containing oxide nanoparticles at varying shear rate. Journal of Nanofluids, 7(6), pp.1075-1080.
18. Khoja, A.H., Yahya, S.M., Nawar, A., Ansari, A.A. and Qayyum, M., 2018. Fermentation of sugarcane molasses using Zymomonas mobilis for enhanced bioethanol production. J Adv Res Appl Sci Eng Technol, 11, pp.31-38.
19. Ansari, A.A., Goyal, V., Yahya, S.M. and Hussain, T., 2018. Experimental investigation for performance enhancement of a vapor compression refrigeration system by employing several types of water-cooled condenser. Science and Technology for the Built Environment, 24(7), pp.793-802.
20. Ansari, A.A., Khan, F., Chaturvedi, P., Goyal, V., Raj, A. and Hussain, T., 2018. Theoretical and Experimental Performance Evaluation of Vapour Compression Refrigeration System Using Organic and Inorganic Pads in Evaporative Cooled Condenser. Advanced Science, Engineering and Medicine, 10(3-4), pp.374-378.
21. Yahya, S.M., Hussain, T. and Chaturvedi, P., 2018. Pool Boiling Heat Transfer and Critical Heat Flux Enhancement of TiO2/Water Nanofluid. Advanced Science, Engineering and Medicine, 10(3-4), pp.298-303.
22. Ansari, S., Yahya, S.M., Umair, M., Naim, M.S., Bhardwaj, P., Chaturvedi, P., Khan, F. and Hussain, T., 2018. Experimental Investigation of Viscosity for Al2O3, CuO and TiO2 Nanoparticles in Deionised Water at a Fixed Shear Rate. Advanced Science, Engineering and Medicine, 10(3-4), pp.293-297.
23. Rehman, S., 2018. Hot surface ignition and combustion characteristics of sprays in constant volume combustion chamber using various sensors. Cogent Engineering, 5(1), p.1464879.
24. Ansari, M., Kim, K.Y. and Kim, S., 2018. Numerical and experimental study on mixing performances of simple and vortex micro T-Mixers. Micromachines, 9(5), p.204.
25. Husain, A., Khan, F.A., Huda, N. and Ansari, M.A., 2018. Mixing performance of split-and-recombine micromixer with offset inlets. Microsystem Technologies, 24(3), pp.1511-1523.
26. Faraz, S.M., Wakeel, S. and Khan, A.A., 2018. Smart Spirit level., International Journal of Engineering Technology Science and Research, 5(3), pp. 507-509.
27. Husain, S. and Siddiqui, M.A., 2018. Numerical and experimental analysis of natural convection flow boiling of water in internally heated vertical annulus. Numerical Heat Transfer, Part A: Applications, 73(9), pp.624-653.
28. Husain, S. and Siddiqui, M.A., 2018. Experimental and numerical analysis of transient natural convection of water in a high aspect ratio narrow vertical annulus. Progress in Nuclear Energy, 106, pp.1-10.
29. Usmani, A.Y. and Muralidhar, K., 2018. Flow in an intracranial aneurysm model: effect of parent artery orientation. Journal of Visualization, 21(5), pp.795-818.
30. Usmani, A. and Patel, S., 2018. Hemodynamics of a Cerebral Aneurysm under Rest and Exercise Conditions. International Journal of Energy for a Clean Environment, 19(1-2). Pp.119-136.
31. Makade, R.G. and Jamil, B., 2018. Statistical analysis of sunshine based global solar radiation (GSR) models for tropical wet and dry climatic Region in Nagpur, India: A case study. Renewable and Sustainable Energy Reviews, 87, pp.22-43.
32. Jamil, B. and Siddiqui, A.T., 2018. Estimation of monthly mean diffuse solar radiation over India: performance of two variable models under different climatic zones. Sustainable Energy Technologies and Assessments, 25, pp.161-180.
33. Bailek, N., Bouchouicha, K., Aoun, N., Mohamed, E.S., Jamil, B. and Mostafaeipour, A., 2018. Optimized fixed tilt for incident solar energy maximization on flat surfaces located in the Algerian Big South. Sustainable Energy Technologies and Assessments, 28, pp.96-102.
34. Jamil, B., Siddiqui, A.T. and Denkenberger, D.C., 2019. Solar radiation on south‐facing inclined surfaces under different climatic zones in India. Environmental Progress & Sustainable Energy, 38(3).
35. Sharma, A.P., Khan, S.H., Kitey, R. and Parameswaran, V., 2018. Effect of through thickness metal layer distribution on the low velocity impact response of fiber metal laminates. Polymer Testing, 65, pp.301-312.
36. Sharma, A.P. and Khan, S.H., 2018. Influence of metal layer distribution on the projectiles impact response of glass fiber reinforced aluminum laminates. Polymer Testing, 70, pp.320-347.
37. Khan, S.H. and Sharma, A.P., 2018. Progressive damage modeling and interface delamination of cross-ply laminates subjected to low-velocity impact. The Journal of Strain Analysis for Engineering Design, 53(6), pp.435-445.
38. Alam, Z., Khan, D.A. and Jha, S., 2018. A study on the effect of polishing fluid volume in ball end magnetorheological finishing process. Materials and Manufacturing Processes, 33(11), pp.1197-1204.
2017 Publications
1. Hasan, N. and Saeed, A., 2017. Effects of heating and free-stream
orientation in two-dimensional forced convective flow of air past a square
cylinder. International Journal of Thermal Sciences, 112, pp.1-30.
2. Azhar, M. and Siddiqui, M.A., 2017. Optimization of operating temperatures in the gas operated single to triple effect vapour absorption refrigeration cycles. International Journal of Refrigeration, 82, pp.401-425.
3. Azhar, M. and Siddiqui, M.A., 2017. Energy and exergy analyses for optimization of the operating temperatures in double effect absorption cycle. Energy Procedia, 109, pp.211-218.
4. Mustafa, J., Husain, S. and Siddiqui, M.A., 2017. Experimental studies on natural convection of water in a closed-loop vertical annulus. Experimental Heat Transfer, 30(1), pp.25-45.
5. Husain, A., Ansari, R. and Khan, A.H., 2017. Experimental and numerical investigation of perforation of thin polycarbonate plate by projectiles of different nose shape. Latin American Journal of Solids and Structures, 14(2), pp.357-372.
6. Rathi, V. and Khan, A.A., 2017. Vibration Annihilation of Sandwiched Beam with MROF DTSMC. Engineering, 9(09), pp.755-778.
7. Alam, S.S. and Qamareen, A., 2017. Flame Characteristics of Commercial Fuels With Respect to Single Droplet Combustion-For Spray Applications. International Journal of Theoretical and Applied Mechanics, 12(4), pp.681-697.
8. Farooquie, P., Suhail, A. and Faisal, M.N., 2017. A grey-based approach for managing uncertainties and performance in automotive supply chains. International Journal of Industrial and Systems Engineering, 27(1), pp.73-89.
9. Ahmed, S.S., Bhardwaj, S., Ansari, M.K., Farooq, O. and Khan, A.A., 2017. Role of 1.5 mm microplates in treatment of symphyseal fracture of mandible: A stress analysis based comparative study. Journal of oral biology and craniofacial research, 7(2), pp.119-122.
10. Zunaid, M., Murtaza, Q. and Gautam, S., 2017. Energy and performance analysis of multi droplets shower cooling tower at different inlet water temperature for air cooling application. Applied Thermal Engineering, 121, pp.1070-1079.
11. Pandey, S.M., Murtaza, Q. and Walia, R.S., 2017. Study of dry wear behavior and morphological characteristic of 60% Mo-20% NiCr-10% CrC-10% Mo+ Fe based alloy coating by atmospheric plasma spray technique. Advances in Materials and Processing Technologies, 3(3), pp.393-406.
12. Alam, M.T., Ansari, A.H., Arif, S. and Alam, M.N., 2017. Mechanical properties and morphology of aluminium metal matrix nanocomposites-stir cast products. Advances in Materials and Processing Technologies, 3(4), pp.600-615.
13. Arif, S., Alam, M.T., Ansari, A.H., Siddiqui, M.A. and Mohsin, M., 2017. Study of mechanical and tribological behaviour of Al/SiC/ZrO2 hybrid composites fabricated through powder metallurgy technique. Materials Research Express, 4(7), p.076511.
14. Alam, T. and Ansari, A.H., 2017. Review on Aluminium and Its Alloys for Automotive Applications. International Journal of Advanced Technology in Engineering and Science, 5(5).
15. Khan, I.A., Prateek, K. and Mohsin, S., 2017. Effect of wrist abduction on force applied and response time during touch screen mobile phone use. Int. Journal of Engineering Research and Application www. ijera. com ISSN, 7(65), pp.01-10.
16. Jamil, B. and Akhtar, N., 2017. Comparison of empirical models to estimate monthly mean diffuse solar radiation from measured data: Case study for humid-subtropical climatic region of India. Renewable and Sustainable Energy Reviews, 77, pp.1326-1342.
17. Jamil, B. and Akhtar, N., 2017. Estimation of diffuse solar radiation in humid-subtropical climatic region of India: Comparison of diffuse fraction and diffusion coefficient models. Energy, 131, pp.149-164.
18. Jamil, B. and Akhtar, N., 2017. Comparative analysis of diffuse solar radiation models based on sky-clearness index and sunshine period for humid-subtropical climatic region of India: A case study. Renewable and Sustainable Energy Reviews, 78, pp.329-355.
19. Jamil, B. and Akhtar, N., 2017. Empirical models for estimation of diffuse solar radiation based on measured data for humid-subtropical climatic region of India. Journal of Renewable and Sustainable Energy, 9(3), p.033702.
20. Jamil, B. and Akhtar, N., 2017. Effect of specific height on the performance of a single slope solar still: An experimental study. Desalination, 414, pp.73-88.
21. Jamil, B. and Akhtar, N., 2017. Empirical models for estimation of diffuse solar radiation based on measured data for humid-subtropical climatic region of India. Journal of Renewable and Sustainable Energy, 9(3), p.033702.
22. Wakeel, S., Saleem, M. and Nemat, A., 2017. A Review on The Mechanical Properties of Aluminium Based Metal Matrix Composite via Powder Metallurgy. International Journal of Mechanical And Production Engineering, 5(4), pp.15-19.
23. Mustafa, J., Husain, S. and Siddiqui, M.A., 2017. Experimental studies on natural convection of water in a closed-loop vertical annulus. Experimental Heat Transfer, 30(1), pp.25-45.
24. Husain, S. and Siddiqui, M.A., 2017. Experimental studies on natural convection boiling of water in a vertical annulus of a closed-loop thermo-siphon. Experimental Heat Transfer, 30(5), pp.441-462.
25. Patel, S., Usmani, A.Y. and Muralidhar, K., 2017. Effect of aorto-iliac bifurcation and iliac stenosis on flow dynamics in an abdominal aortic aneurysm. Fluid Dynamics Research, 49(3), p.035513.
26. Jamil, B. and Siddiqui, A.T., 2017. Generalized models for estimation of diffuse solar radiation based on clearness index and sunshine duration in India: Applicability under different climatic zones. Journal of Atmospheric and Solar-Terrestrial Physics, 157, pp.16-34.
27. Sharma, A.P., Khan, S.H. and Parameswaran, V., 2017. Experimental and numerical investigation on the uni-axial tensile response and failure of fiber metal laminates. Composites Part B: Engineering, 125, pp.259-274.
28. Khan, S.H., Sharma, A.P. and Parameswaran, V., 2017. An Impact induced damage in composite laminates with intra-layer and inter-laminate damage. Procedia engineering, 173, pp.409-416.
29. Alam, Z. and Jha, S., 2017. Modeling of surface roughness in ball end magnetorheological finishing (BEMRF) process. Wear, 374, pp.54-62.
2016 Publications
1. Husain, S. and Siddiqui, M.A., 2016. Experimental and numerical analyses of natural convection flow in a partially heated vertical annulus. Numerical Heat Transfer, Part A: Applications, 70(7), pp.763-775.
2. Fuaad, P.A., Baig, M.F. and Ahmad, H., 2016. Drag-reduction in buoyant and neutrally-buoyant turbulent flows over super-hydrophobic surfaces in transverse orientation. International Journal of Heat and Mass Transfer, 93, pp.1020-1033.
3. Fuaad, P.A., Baig, M.F. and Khan, B.A., 2016. Turbulent drag reduction using active control of buoyancy forces. International Journal of Heat and Fluid Flow, 61, pp.585-598.
4. Farooquie, P. and Farooquie, J.A., 2016. Adoption of E-Business Technologies and Suppliers Performance in Thai Automotive Supply Chains. The South East Asian Journal of Management, pp.73-82.
5. Mairaj J., Adnan, 2016, Second Law Analysis of Series and Parallel Flow Double Effect Vapor Absorption Chiller. , Journal of Mechanical and Civil Engineering. 13 (3), pp. 104-110.
6. Agrawal, S., Singh, R.K. and Murtaza, Q., 2016. Outsourcing decisions in reverse logistics: sustainable balanced scorecard and graph theoretic approach. Resources, Conservation and Recycling, 108, pp.41-53.
7. Agrawal, S., Singh, R.K. and Murtaza, Q., 2016. Disposition decisions in reverse logistics: Graph theory and matrix approach. Journal of Cleaner Production, 137, pp.93-104.
8. Agrawal, S., Singh, R.K. and Murtaza, Q., 2016. Triple bottom line performance evaluation of reverse logistics. Competitiveness Review, 26(3), pp.289-310.
9. Agrawal, S., Singh, R.K. and Murtaza, Q., 2016. Prioritizing critical success factors for reverse logistics implementation using fuzzy-TOPSIS methodology. Journal of Industrial Engineering International, 12(1), pp.15-27.
10. Kumar, D., Murtaza, Q. and Singh, R.C., 2016. Sliding wear behavior of aluminum alloy coating prepared by two-wire electric arc spray process. The International Journal of Advanced Manufacturing Technology, 85(1-4), pp.237-252.
11. Agrawal, S., Singh, R.K. and Murtaza, Q., 2016. Disposition decisions in reverse logistics by using AHP-fuzzy TOPSIS approach. Journal of Modelling in Management, 11(4), pp.932-948.
12. Khan, A.A., Naushad Alam, M. and Wajid, M., 2016. Finite element modelling for static and free vibration response of functionally graded beam. Latin American journal of solids and structures, 13(4), pp.690-714.
13. Khan, M.F., Ansari, A.H., Hameedullah, M., Ahmad, E., Husain, F.M., Zia, Q., Baig, U., Zaheer, M.R., Alam, M.M., Khan, A.M. and AlOthman, Z.A., 2016. Sol-gel synthesis of thorn-like ZnO nanoparticles endorsing mechanical stirring effect and their antimicrobial activities: Potential role as nano-antibiotics. Scientific reports, 6, p.27689.
14. Ali, M. and Murshid, M., 2016. Performance evaluation of flexible manufacturing system under different material handling strategies. Global Journal of Flexible Systems Management, 17(3), pp.287-305.
15. Khan, I.A., Imadullah, H., Khan, S. and Adil, A., 2016. Ergonomic Evaluation of the Angle of Abduction in Laptops Environment. International Journal of Engineering Research and Applications, 6(1), pp.01-08.
16. Sadique, H., Qamareen, A. and Alam, S.S., 2016. Simulation study of Nox and Species Formation in Hydrogen-Air Diffusion Flame 3(10), pp 52-58.
17. Hasan, F., Jain, P.K. and Kumar, D., 2016. Scalability of reconfigurable manufacturing systems based on bowl phenomenon: an implication of modular machines. International Journal of Industrial and Systems Engineering, 22(1), pp.73-95.
18. Jamil, B., Siddiqui, A.T. and Akhtar, N., 2016. Estimation of solar radiation and optimum tilt angles for south-facing surfaces in Humid Subtropical Climatic Region of India. Engineering Science and Technology, an International Journal, 19(4), pp.1826-1835.
19. Rehman, S., 2016. Sensors based measurement techniques of fuel injection and ignition characteristics of diesel sprays in di combustion system. Alexandria Engineering Journal, 55(3), pp.2391-2403.
20. Khanam, S., Tandon, N. and Dutt, J.K., 2016. Multi-event excitation force model for inner race defect in a rolling element bearing. Journal of Tribology, 138(1), p.011106.
21. Khanam, S., Tandon, N. and Dutt, J.K., 2016. A system dynamic approach to bearing fault identification with the application of Kalman and H∞ filters. Journal of Vibration and Control, 22(13), pp.3032-3056.
22. Khan, A.A., Naushad Alam, M. and Wajid, M., 2016. Finite element modelling for static and free vibration response of functionally graded beam. Latin American journal of solids and structures, 13(4), pp.690-714.
23. Tariq, A. and Asif, M., 2016. Experimental investigation of thermal contact conductance for nominally flat metallic contact. Heat and Mass Transfer, 52(2), pp.291-307.
24. Asif, M. and Tariq, A., 2016. Correlations of thermal contact conductance for nominally flat metallic contact in vacuum. Experimental Heat Transfer, 29(4), pp.456-484.
25. Usmani, A.Y. and Muralidhar, K., 2016. Pulsatile flow in a compliant stenosed asymmetric model. Experiments in Fluids, 57(12), p.186.
26. Usmani, A.Y. and Muralidhar, K., 2016. Oscillatory flow in an enlarged compliant vasculature. Biomedical Physics & Engineering Express, 2(2), p.025016.
2015 Publications
1. Iqbal, J., Ullah, M.I., Khan, A.A. and Irfan, M., 2015. Towards sophisticated control of robotic manipulators: An experimental study on a pseudo-industrial arm. Strojniki vestnik-Journal of Mechanical Engineering, 61(7-8), pp.465-470.
2. Muzammil, M., Raja, G. and Ali, I., 2015. Field programmable gate array (FPGA) architecture of diamond search motion estimation algorithm for real-time video applications. NED University Journal of Research, 12(4), p.93.
3. Ahmad, H., Baig, M.F. and Fuaad, P.A., 2015. Numerical investigation of turbulent-drag reduction induced by active control of streamwise travelling waves of wall-normal velocity. European Journal of Mechanics-B/Fluids, 49, pp.250-263.
4. Hasan, N., Khan, S.M. and Shameem, F., 2015. A new flux-based scheme for compressible flows. Computers & Fluids, 119, pp.58-86.
5. Mairaj, M., Siddiqui, S.A. and Hafiz, A., 2015. Energetic and exergetic analysis of some models of vapour absorption chillers using lithium bromide and water. Journal of Basic and Applied Engineering Research, 2(4), pp.326-329.
6. Agrawal, S., Singh, R.K. and Murtaza, Q., 2015. A literature review and perspectives in reverse logistics. Resources, Conservation and Recycling, 97, pp.76-92.
7. Rahman, N.U. and Alam, M.N., 2015. Structural control of piezoelectric laminated beams under thermal load. Journal of Thermal Stresses, 38(1), pp.69-95.
8. Alam, M.T. and Ansari, A.H., 2015. X-ray diffraction analysis and microstructural examination of al-sic composite fabricated by stir casting. International Journal of Science, Technology & Management, 4(1), pp.941-956.
9. Ahmad, S., Alam, M.T., Siddique, M.A. and Ansari, A.H., 2015. Tensile Strength of Synthesized Polystyrene Composites. International Journal of Scientific Research Engineering & Technology, 4(10), pp.1038-1044.
10. Ahmad, S., Alam, M.T., Siddique, M.A. and Ansari, A.H., 2015. Morphological and Flow Characteristics of Synthesized Polystyrene Composites. International Journal of Mechanical Engineering & Technology (IJMET), 6(5), pp.17-24.
11. Khan, W.U. and Ali, M., 2015. Effect of sequencing flexibility on the performance of flexibility enabled manufacturing system. International Journal of Industrial and Systems Engineering, 21(4), pp.474-498.
12. Khan, I.A., 2015. Multi-Response Research Methodology for Ergonomic Design of Human-CNC Machine Interface. Int. J. Eng. Res. Appl, 10(3), pp.75-109.
13. Khan, A.H. and Patel, B.P., 2015. On the nonlinear dynamics of bimodular laminated composite conical panels. Nonlinear Dynamics, 79(2), pp.1495-1509.
14. Khan, M.Y.A., Hasan, F., Panwar, S. and Chakrapani, G.J., 2016. Neural network model for discharge and water-level prediction for Ramganga River catchment of Ganga Basin, India. Hydrological Sciences Journal, 61(11), pp.2084-2095.
15. Hasan, F. and Jain, P.K., 2015. Genetic Modelling for selecting optimal machine configurations in reconfigurable manufacturing system. In Applied Mechanics and Materials (Vol. 789, pp. 1229-1239). Trans Tech Publications.
16. Ashraf, M. and Hasan, F., 2015. Product family formation based on multiple product similarities for a reconfigurable manufacturing system. International Journal of Modelling in Operations Management, 5(3-4), pp.247-265.
17. Yahya, S.M., Anwer, S.F. and Sanghi, S., 2015. Turbulent forced convective flow in an anisothermal channel. International Journal of Thermal Sciences, 88, pp.84-95.
18. Mehdi, H., Anwer, F. and Ahmad, A., 2015. Fluid Structure Interaction of Flow around a Pleated Insect 2D Airfoil at Ultra Low Reynolds Numbers. International Journal of Research in Aeronautical and Mechanical Engineering, 3(3), pp.19-37.
19. Yahya, S.M., Anwer, S.F. and Sanghi, S., 2015. LES of Stably Stratified Flow with Varying Thermophysical Properties. Numerical Heat Transfer, Part A: Applications, 67(12), pp.1408-1427.
20. Kapuria, S., Patni, M. and Yasin, M.Y., 2015. A quadrilateral shallow shell element based on the third-order theory for functionally graded plates and shells and the inaccuracy of rule of mixtures. European Journal of Mechanics-A/Solids, 49, pp.268-282.
21. Khan, H., Talib, F. and Faisal, M.N., 2015. An analysis of the barriers to the proliferation of M-Commerce in Qatar: A relationship modeling approach. Journal of Systems and Information Technology, 17(1), pp.54-81.
22. Talib, F. and Rahman, Z., 2015. Identification and prioritization of barriers to total quality management implementation in service industry: an analytic hierarchy process approach. The TQM Journal, 27(5), pp.591-615.
23. Nazim, R., Yahya, S. and Malim, M.R., 2015. A new approach to supplier selection problem: An introduction of AHP-SCOR integrated model. International Journal on Recent and Innovation Trends in Computing and Communication, 3(1), pp.338-346.
24. Salmani, M.H., Rehman, S., Zaidi, K. and Hasan, A.K., 2015. Study of ignition characteristics of microemulsion of coconut oil under off diesel engine conditions. Engineering Science and Technology, an International Journal, 18(3), pp.318-324.
25. Khanam, S., Dutt, J.K. and Tandon, N., 2015. Impact force based model for bearing local fault identification. Journal of Vibration and Acoustics, 137(5), p.051002.
26. Arif, M.R., Arif, S. and Azhar, M., 2015. Thermal Diffusivity Measurement of Spherical Shaped Food Products under Forced Convection Cooling. International Journal of Innovative Research in Science, Engineering and Technology, 4(7). pp.5521-5527.
27. Alam, Z., Iqbal, F. and Jha, S., 2015. Automated control of three axis CNC ball end magneto-rheological finishing machine using PLC. IJAAC, 9(3), pp.201-210.
CONFERENCE SERIES (Published)
2019
1. Varshney, A., Singh, P., Varshney, M., Alam, S.S. and Mehmood, A., 2019. Ignition Delay Control in Constant Volume Combustion Systems. In AIAA Propulsion and Energy 2019 Forum (p. 4127).
2. Pandey, J., Ansari, M.Z., Husain, A. and Ansari, M.A., 2019, May. Comparative study of flow characteristics in uniformly varying microchannel for DI water and nanofluid. In AIP Conference Proceedings (Vol. 2105, No. 1, p. 020016). AIP Publishing.
3. NH Saleem A. Khan, M. Abu Shahzer, 2019, 2-D Numerical Study of Effect of Reynolds Number on Double-Diffusive Jet Interaction in a Passive Mixture, Materials Today: Proceedings.
2018
1. Qadri, M.J., Khan, A.H. and Ansari, R., 2018, August. Experimental and numerical analysis of impact of conical projectile on polyethylene plate. In IOP Conference Series: Materials Science and Engineering (Vol. 396, No. 1, p. 012069). IOP Publishing.
2. Husain, A., Khan, A.H. and Ansari, R., 2018, June. Ballistic performance evaluation of polycarbonate plate based on quasi-static perforation. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012087). IOP Publishing.
3. Qadri, M.J., Khan, A.H. and Ansari, R., 2018, August. Experimental and numerical analysis of impact of conical projectile on polyethylene plate. In IOP Conference Series: Materials Science and Engineering (Vol. 396, No. 1, p. 012069). IOP Publishing.
4. Butola, R., Jain, R., Bhangadia, P., Bandhu, A., Walia, R.S. and Murtaza, Q., 2018. Optimization to the parameters of abrasive flow machining by Taguchi method. Materials Today: Proceedings, 5(2), pp.4720-4729.
5. Jamil, A., Khan, A.H. and Ali, S., 2018, August. Experimental and numerical investigations on failures due to plasticity in thin walled structures. In IOP Conference Series: Materials Science and Engineering (Vol. 396, No. 1, p. 012065). IOP Publishing.
6. Khan, A.H., Parvez, M.T. and Ahmed, R., 2018, August. Influence of aspect ratio on the linear and non-linear steady state forced vibration response of cylindrical open shells. In IOP Conference Series: Materials Science and Engineering (Vol. 396, No. 1, p. 012064). IOP Publishing.
7. Khalid, H.M., Yasin, M.Y. and Khan, A.H., 2018, June. Free Vibration Analysis of Multilayered Arches using a Layerwise Theory. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012168). IOP Publishing.
8. Beg, M.S., Khan, A.H. and Yasin, M.Y., 2018, June. Effect of boundary conditions on the non-linear forced vibration response of isotropic plates. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012089). IOP Publishing.
9. Beg, M.S., Yasin, M.Y. and Khalid, H.M., 2018, August. Analysis of Laminated and FGM Beams using Various Theories. In IOP Conference Series: Materials Science and Engineering (Vol. 404, No. 1, p. 012030). IOP Publishing.
10. Beg, M.S., Yasin, M.Y. and Khalid, H.M., 2018, August. Analysis of Laminated and FGM Beams using Various Theories. In IOP Conference Series: Materials Science and Engineering (Vol. 404, No. 1, p. 012030). IOP Publishing.
11. Gopal, A.V. and Jamil, A., 2018, August. Development of benchmark for simulation of Mode I time based fracture. In IOP Conference Series: Materials Science and Engineering (Vol. 396, No. 1, p. 012063). IOP Publishing.
12. Chaturvedi, P., Yahya, S.M. and Hussain, T., 2018, June. Pool Boiling Heat Transfer and CHF enhancement of Aqueous Al2O3 and CuO Nanofluid. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012154). IOP Publishing.
13. Hussain, T., Khan, F., Ansari, A.A., Chaturvedi, P. and Yahya, S.M., 2018, June. Performance improvement of vapour compression refrigeration system using Al2O3 nanofluid. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012155). IOP Publishing.
14. Husain, J. and Ansari, M.A., 2018, August. Study of mixing in circular unbalanced split & recombine micromixer. In IOP Conference Series: Materials Science and Engineering (Vol. 404, No. 1, p. 012032). IOP Publishing.
15. Wakeel, S., Manakari, V., Parande, G., Kujur, M.S. and Gupta, M., 2018. Synthesis and mechanical response of NiTi SMA nanoparticle reinforced Mg composites synthesized through microwave sintering process. Materials Today: Proceedings, 5(14), pp.28203-28210.
16. Zia, Y.B. and Khan, A.A., 2018, June. Comparison of various higher order shear deformation theories for static and modal analysis of composite beam. In IOP Conference Series: Materials Science and Engineering (Vol. 377, No. 1, p. 012170). IOP Publishing.
17. Khan, M.F., Hussain, A., Usmani, A.Y., Yadav, R. and Jafri, S.A.H., 2018. Multiphase Flow Modeling of Molten Steel and Slag Flow for Different Tundish Configurations. Materials Today: Proceedings, 5(11), pp.24915-24923.
2017
1. Saood, A., Khan, A.H. and Khan, A.A., 2017. Steady State Periodic Response of Laminated Composite Plates With/Without Geometric Nonlinearity. Materials Today: Proceedings, 4(9), pp.10225-10229.
2. Shadab, M.A. and Baig, M.F., 2017. Investigation and control of unstart phenomenon in scramjets. In 21st AIAA international space planes and hypersonics technologies conference (p. 2298).
3. Vashishtha, S., Baig, M.F. and Hasan, N., 2017. Lift Augmentation by thermal Forcing at the trailing edge. In 35th AIAA Applied Aerodynamics Conference (p. 3910).
4. Arif, S., Alam, M.T., Ansari, A.H., Siddiqui, M.A. and Mohsin, M., 2017, August. Investigation of Mechanical and Morphology of Al-SiC composites processed by PM Route. In IOP Conference Series: Materials Science and Engineering (Vol. 225, No. 1, p. 012277). IOP Publishing.
5. Alam, M.T., Arif, S. and Ansari, A.H., 2017, August. Mechanical Behaviour and Morphology of A356/SiC Nanocomposites Using Stir Casting. In IOP Conference Series: Materials Science and Engineering (Vol. 225, No. 1, p. 012293). IOP Publishing.
6. Siddiqui, A.T., Arqam, M., Ahmad, H. and Husain, S., 2017. Rayleigh-Bnard Convection in Shear Enclosure: The Role of Thermal Instabilities. Materials Today: Proceedings, 4(9), pp.9951-9955.
7. Hasan, S., Jain, A., Anwar, F. and Khan, S.A., 2017. Concept Design of an Autonomous Underwater Vehicle with Integrated Ice Penetrating System. In AIAA SPACE and Astronautics Forum and Exposition (p. 5312).
2015
1. Singla, D., Amulya, K. and Murtaza, Q., 2015. CNT reinforced aluminium matrix composite-a review. Materials Today: Proceedings, 2(4-5), pp.2886-2895.
BOOK CHAPTERS (Published)
2019
1. Khan, D.A., Alam, Z., Iqbal, F. and Jha, S., 2020. Design and Development of Improved Ball End Magnetorheological Finishing Tool with Efficacious Cooling System. In Advances in Simulation, Product Design and Development (pp. 557-569). Springer, Singapore.
2018
1. Yaqzan, M., Rafat, Y., Abdullah, S. and Alam, M.S., 2018. Thermal Management Solutions of Lithium-Ion Energy Storage Batteries for xEV Deployment in North India. In ISGW 2017: Compendium of Technical Papers (pp. 179-191). Springer, Singapore.
2. Arif, M.S.B., Avob, S.M., Yahya, S.M., Mustafa, U., Ado, M. and Khan, Z.A., 2018, October. Effect of Zn-H 2 0 Nanofluid Back-Flow Channels on the Efficiency and Electrical Power Output of a Solar PV Panel Used in Standalone PV System. In 2018 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC) (pp. 493-497). IEEE.
3. Asaad, M., Shrivastava, P., Alam, M.S., Rafat, Y. and Pillai, R.K., 2018. Viability of xEVs in India: A Public Opinion Survey. In ISGW 2017: Compendium of Technical Papers (pp. 165-178). Springer, Singapore.
2017
1. Huda, N. and Anwer, S.F., 2017. The effects of leading-edge orientation on the aerodynamic performance of dragon fly wing section in gliding flight. In Fluid Mechanics and Fluid PowerContemporary Research (pp. 1433-1441). Springer, New Delhi.
2. Usmani, A.Y. and Muralidhar, K., 2017. Experimental Study of Oscillatory Flow in a Rigid and a Compliant Tubular Bulge. In Fluid Mechanics and Fluid PowerContemporary Research (pp. 1421-1431). Springer, New Delhi.
2016
1. Khan, B.A. and Baig, M.F., 2016. Turbulent Drag Reduction in Channel Flow Using Weak-Pressure Forcing. In Advances in Computation, Modeling and Control of Transitional and Turbulent Flows (pp. 195-203).
2. Khan, M.M., Ahmad, M.J. and Jamil, B., 2016. Development of models for the estimation of global solar radiation over selected stations in India. In Energy, Transportation and Global Warming (pp. 149-160). Springer, Cham.
3. Ashraf, M., Khan, M.A., Hasan, F., Siddiqui, M., Murtaza, Q. and Ali, S.N., 2016, December. Optimum allocation of machines with multiple objectives using NSGA-II. In 6th international & 27th all India manufacturing technology, design and research conference (AIMTDR-2016) (No. 1, pp. 1723-1728).
4. Leonard, A., 2016. Large-Eddy Simulation of the Navier-Stokes Equations: Deconvolution, Particle Methods, and Super-Resolution. In Advances in Computation, Modeling and Control of Transitional and Turbulent Flows (pp. 1-16).
5. Jamil, B. and Akhtar, N., 2016. Effect of gap between absorber plate and condenser cover on the performance of a solar still. In Energy, transportation and global warming (pp. 161-173). Springer, Cham.
6. Haider, S.A. and Ali, R., 2016. Mixed convective flow past a square cylinder with variable Prandtl number. In Nat. Conf. on Mech. Engg.Ideas, Innovations and Initiatives (pp. 339-344).
7. Khan, D.A., Alam, Z. and Jha, S., 2016, November. Nanofinishing of copper using ball end magnetorheological finishing (BEMRF) process. In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers Digital Collection
2015
1. Jamil, B. and Ahmad, M.J., 2015. Comparison of Energy Reduction Potential of an Adobe House Under Different Climatic Conditions in India. In Progress in Clean Energy, Volume 2 (pp. 385-406). Springer, Cham.
2. Jamil, B. and Akhtar, N., 2015. Statistical analysis of short-term solar radiation data over Aligarh (India). In Progress in Clean Energy, Volume 2 (pp. 937-948). Springer, Cham.
3. Pirondi, A., Giuliese, G., Moroni, F., Bernasconi, A. and Jamil, A., 2015. Simulating the mixed-mode fatigue delamination/debonding in adhesively-bonded composite joints. In Fatigue and Fracture of Adhesively-Bonded Composite Joints (pp. 369-400). Woodhead Publishing.
BOOKS (Published)
1. Kim, K.Y., Ansari, M.A. and Afzal, A. eds., 2018. Passive Micromixers. MDPI.
![photo](https://api.amu.ac.in/storage/images/empphoto/3416.jpg)