Department of Mechanical Engineering
Other Committees
COMMITTEES OF THE DEPARTMENT
Curriculum Development Committee (CDC)
Prof. M. F. S. Baig (Convener)
Prof. Imtiaz Ali Khan
Prof. Akhter H. Ansari
Prof. M. Naushad Alam
Prof. Nadeem Hasan
Prof. Naiem Akhtar
Mr. Nafees Ahmad
Prof. Ahmad Ali Khan
Post Graduate Research Committee (PGRC)
Prof. Raisuddin Ansari (Convener)
Prof. Mohammad Altamush Siddiqui
Prof. Mirza Faisal Sayeed Baig
Prof. Ahmad Ali Khan
Prof. Imtiaz Ali Khan, Convener, PGCC- Ind. & Prod.
Prof. Mohd. Naushad Alam (PhD Coordinator)
Prof. Nadeem Hasan, Convener, PGCC-Thermal
Prof. Syed Fahad Anwar
Prof. Arshad Hussain Khan, Convener, PGCC-Design
Prof. Faisal Hasan
Prof. Saleem Anwar Khan, Convener, PGCC – Rob. & Aut.
Note : PGRC will be the Co-ordination Committee for all PG courses. All the four PGCC’s will be Sub-Committees under PGRC. PGRC will also act as Research Steering Committee.
PG Co-Ordination Committee (Thermal)
Prof. Naiem Akhtar (Convener)
Prof. Nadeem Hasan
Prof. Shah Shahood Alam
Mr. Nafees Ahmad
Prof. Syed Fahad Anwar
Dr. Syed Mohd. Yahya
PG Co-Ordination Committee (Ind. & Prod.)
Prof. Imtiaz Ali Khan (Convener)
Prof. Abid Ali Khan
Prof. Akhtar Hussain Ansari
Prof. Mohammad Ali
Prof. Parveen Farooquie
Prof. Faisal Hasan
PG Co-Ordination Committee (Machine Design)
Prof. M Naushad Alam (Convener)
Prof. Raisuddin Ansari
Prof. Ahmad Ali Khan
Prof. Arshad Hussain Khan
Dr. M. Yaqoob Yasin
Mr. M. Rashid Zafar Ansari
PG Co-Ordination Committee (Rob. & Aut)
Prof. Saleem Anwar Khan (Convener)
Prof. M. Faisal S. Baig
Prof. Mohammed Ali
Dr. Muhammad Muaz
Dr. Yasser Rafat
Dr. Azhar Jamil
UG Co-Ordination Committee
Prof. Mohammad Ali (Convener)
Prof. Akhtar Husain Ansari
Prof. M. Naushad Alam
Prof. Nadeem Hasan
Prof. Mohammad Faizan
Prof. Saleem Anwar Khan
Prof. Arshad Hussain Khan
Dr. Mubashshir Ahmad Ansari, UG Coordinator
Dr. Najeeb Ur Rahman, In-charge, Time-Table
Dr. M. Rashid Zafar
Project Monitoring Committee (PMC)
Prof. Mohammad Muzammil, Chairman
Prof. M. F. S Baig, Senior most Professor of Fluid Mechanics (Member)
Prof. M. Altamush, Senior most Professor of Thermal Section (Member)
Prof. Naiem Akhtar, Senior most Professor of Thermal Section (Member)
Prof. Raisuddin Ansari, Senior most Professor of Machine Design Section (Member)
Prof. Ahmad Ali Khan,
Senior most Professor of Machine Design (Member)Prof. Mohammed Ali,
Senior most Professor of Ind. & Prod. Section (Member)- Prof. Abid Ali Khan,Senior most Professor of Ind. & Prod. Section (Member)
Mr. Nafees Ahmad, Senior most Associate Professor Heat Power Section(Member)
Asif Sami, Senior most Associate Professor of Machine Design Section (Member)
Mr. Khusro Qasim, Senior most Assistant Professor (Member)
Prof. Mohammed Ali, Secretary of the Departmental Steering Committee
Prof. M. Muzammil (Convener)
Prof. Abid Ali Khan
Prof. S. Fahad Anwer
Dr. Fazlur Rehman (Dept. of Anatomy J.N.M.C.)
Mr. Mohd. Imran, (Asstt. Prof. IPR, ZHCET)
Industry Institute Interaction Committee
Prof. Mohammad Muzammil (Chairman)
Prof. Arshad Hussain Khan (Convener)
Prof. Syed Fahad Anwer
Mr. Nafees Ahmad
Mr. Abdul Jabbar, Workshop superintendent
Data Base Cell (DBC)
Prof. Mohammed Ali (Convenor).
Dr. M. Yaqoob Yasin.
Dr. Azhar Jamil.
Dr. Mohammad Asif.
Mr. M. Zakir Hashmi.
Mr. M. Mushir Riaz.
Nodal Officers to Monitor the use of Electricity
Mr. Mohd. Naim, Tech. Asstt. – Heat Power Section
Mr. Nafees Ahmad, Tech. Asstt.– Ind. & Prod. Section.
Mr. Ehteshamur Rehman, Tech. Asstt.– M/C Design Section.
Mr. M. Shahzad Sharif, Tech. Asstt.- F. M. Section.
Mr. Mohd. Asghar, Tech. Asstt. – Workshop Office and all shops.
Mr. Zaheer Ahmad, Tech. Asstt. – Computing System Lab, Seminar Library and Powder Metallurgy Lab.
Mr. Faisal Kirmani, Lab Asstt. – Office Building.
Career Counselling Committee (CCC)
Prof. M. Faisal S. Baig (Convener)
Prof. Ahmad Ali Khan
Prof. Faisal Hasan
Prof. Saleem Anwar Khan
Academic Monitoring Committee (AMC)
Prof. M. Altamush Siddiqui (Convener)
Prof. Mirza Faisal Sayeed Baig
Prof. Mohd. Muzammil
Prof. Raisuddin Ansari
Feed Back Committee
Dr. Rashid Ali (Convener)
Dr. Mubashshir Ahmad Anw
Mr. Taliv Hussain
Mr. Mohammad Rashid Zafar Ansari
Dr. Farhan Ahmad Shameem
Mr. Mohammad Zakir Hashmi
Mr. Mohammad Mushir Riaz
Committee to obtain Data from the Alumni Cell
Mr. Nafees Ahmad (Convener)
Dr. S.M. Yahya
Mr. Abdul Jabbar
Prof. Mohammed Ali (Convenor).
Dr. M. Yaqoob Yasin.
Dr. Azhar Jamil.
Dr. Mohammad Asif.
Mr. M. Zakir Hashmi.
Mr. M. Mushir Riaz.
Dr. Gufran S. Khan, Associate Professor, Instrument Design & Development Centre, IIT, Delhi (Person from Academic Institute)
Dr. Indra Vir Singh, Associate Professor, Department of Mech. & Ind. Engineering, IIT, Roorkee (Person from Academic Institute)
Mr. Vijay Kumar, Director, Ministry of Industry, Karnal, Haryana (Person from Industry)
Mr. Kamran Farshori, CEO, Batala Engineering, Sector 150, Greater Noida (Person from Industry)
Prof. M. Faisal S. Baig, Professor, Department of Mechanical Engineering, A.M.U., Aligarh (PGRC Representative)
Prof. Mohammed Ali, Professor, Department of Mechanical Engineering, A.M.U., Aligarh (UGCC Representative)
Prof. M. Muzammil, Chairman, Department of Mech. Engg., A.M.U., Aligarh, (Chairman of the Department)
Committee to Decide the Utilization of IRG Funds Collected in the Department
Prof. Mohammad Muzammil (Chairman)
Prof. Raisuddin Ansari (Next Chairman)
Prof. Abid Ali Khan, Section Incharge, Industrial & Production Section
Prof. Arshad Hussain Khan, Section Incharge, Machine Design Section
Prof. Syed Fahad Anwar, Section Incharge, Fluid Mechanics Section
Prof. Saleem Anwar Khan, Section Incharge, Thermal Engineering Section
Prof. Mohammed Ali, Member from Industrial & Production Section
Dr. Danish Iqbal, Member from Machine Design Section
Dr. Rashid Ali, Member from Fluid Mechanics Section
Mr. Nafees Ahmad, Member from Thermal Engineering Section
Dr. Syed Mohd Yahya Coordinator (EV and Hybrid Vehicles Program)
Quality Assurance Cell Committee
Prof. Mirza Faisal Sayeed Baig (Convener)
Prof. Imtiaz Ali Khan
Prof. Shah Shahood Alam
Prof. Naiem Akhtar
Prof. M. Naushad Alam
Committee for Editorial Board for Students' Magazine
Dr. Yasser Rafat (Convener)
Mr. Nafees Ahmad
Prof. Syed Fahad Anwer
Prof. Saleem Anwar Khan
Mr. Ateeb Ahmad Khan
Committee for Mentoring Activities
Dr. Rashid Ali (Convener)
Prof. Arshad Hussain Khan
Prof. Parveen Farooqui
Dr. S.M. Yahya
Prof. Abid Ali Khan (Convenor)
Prof. Akhtar H. Ansari.
Prof. Syed Fahad Anwer.
Prof. Arshad Hussain Khan.
Prof. Mohammad Faizan.
Committee to Develop the Academic Calendar for UG and PG Programs
Prof. Imtiaz Ali Khan (Convener)
Dr. Najeeb Ur Rehman
Website Committee
Dr. Abdullah Y Usmani (Convener)
Dr. Danish Iqbal
Dr. Sanaur Rehman
Dr. Sajjad Arif
Dr. Muhammed Muaz
Dr. Md. Reyaz Arif
Committee to suggest the criteria for selection of Outstanding Researcher
Prof. Faisal Hasan (Convener)
Prof. M. Altamush Siddiqui
Prof. Mirza Faisal Sayeed Baig
Prof. Arshad Hussain Khan
Prof. Syed Fahad Anwer
Anti-Ragging Committee
Prof. Mirza Faisal Sayeed Baig
Prof. Imtiaz Ali Khan
Prof. Parveen Farooquie
Mr. Nafees Ahmad
Dr. Rashid Ali
Mr. Salman Mohd. Khan (Ph.D. Scholar)
Mr. Athar Zafar (M.Tech. Student)
Mr. Sharib Imam (M.Tech Student)
Anti-Sexual Harassment Committee
Prof. Parveen Farooquie (Convener)
Prof. Ahmad Ali Khan
Mr. Nafees Ahmad
Prof. Mohammad Muzammil (Chairman)
Prof. M. Altamush Siddiqui (Seniormost Professor)
Mr. Nafees Ahmad (Seniormost Associate Professor)
Mr. Khusro Qasim (Seniormost Assistant Professor)
Ms Zuha shoaib (B.Tech. II Year)
Mr. Mayank Awasthi (B.Tech. II Year)
Mr. Arquam Hashim Siddiquie (B.Tech. III Year)
- Ms Swarnima(B.Tech. III Year)
- Mr. Mohammad Farhan Khan(B.Tech. IV Year)
- Ms. Zaufisha Saleem (B.Tech. IV Year)
Prof. Saleem Anwar Khan (Convener)
Prof. Raisuddin Ansari
Prof. Arshad Hussain Khan
Prof. Abid Ali Khan
Mr. Nafees Ahmad
Prof. Syed Fahad Anwer
Prof. Mohd. Ali
Dr. Rashid Ali
Dr. Syed Mohd Yahya
Dr. Danish Iqbal
Prof. Mohammed Ali (Convener)
Prof. Imtiaz Ali Khan
Mr. Nafees Ahmad.
Dr. Yasser Rafat
Dr. Rashid Ali (Coordinator)
Prof. Syed Fahad Anwer (Coordinator)
Prof. Saleem Anwer Khan (Co-Coordinator)
Prof. Imtiaz Ali Khan (Coordinator)
Prof. Arshad Hussain Khan (Coordinator)
Committee to decide the utilization of IRG funds collected in the department.
Prof. Mohammad Muzammil (Chairman)
Prof. Raisuddin Ansari (Next Chairman)
Prof. Abid Ali Khan (Section In-charge, Industrial & Production Engg. Section)
Prof. Arshad Hussain Khan (Section In-charge, Machine Design Section)
- Prof. Syed Fahad Anwar Khan (Section In-charge, Fluid Mechanics Section)
- Prof. Saleem Anwar Khan(Section In-charge, Thermal Engg. Section)
- Prof. Mohammed Ali (Member from Industrial & Production Engg. Section)
- Dr. Danish Iqbal (Member from Machine Design Section)
- Dr. Rashid Ali (Member from Fluid Mechanics Section)
- Mr. Nafees Ahmad(Member from Thermal Engg. Section)
- Dr. Syed Mohd Yahya (Coordinator, EV and Hybrid Vehicles Program)
Prof. Abid Ali Khan - Industrial & Production Engineering
Prof. Arshad Husain Khan - Machine Design
Prof. Syed Fahad Anwer - Fluid Mechanics
Mr. Saleem Anwar Khan - Thermal Engineering
Prof. M. Naushad Alam
Prof. Mohammad Faizan
![photo](https://api.amu.ac.in/storage/images/empphoto/3416.jpg)