DEPARTMENT.FACULTY

photo
Dr. M. Arsalan Khan (PhD, England; MSc Engg, Scotland)
  • DEPARTMENT_STAFF.QUALIFICATION

    PhD (England), MSc Engg. (Scotland), [IStructE (Graduate, UK), MIES (Chartered, Singapore), IACM (Spain), IET (UK), ACI (Faculty, USA)]

  • DEPARTMENT_STAFF.DESIGNATION

    Assistant Professor

  • DEPARTMENT_STAFF.THRUST_AREA

    Structural Engineering

  • DEPARTMENT_STAFF.ADDRESS

  • DEPARTMENT_STAFF.MOBILE

    9045401002 , ,

  • DEPARTMENT_STAFF.EMAIL

    marsalan.cv@amu.ac.in , arsalan.khan@ifg.uni-kiel.de , mohd.arsalan.khan@hotmail.co.uk

  • DEPARTMENT_STAFF.TIME_TABLE

    Time table 2021-22

DEPARTMENT_STAFF.COMPLETE_CV
ORCID iD iconorcid.org/0000-0003-2841-6473 [Refer Orcid ID for publications]


Professional affiliations:

Committee: ASCE 11-28 Committee for Standard, "Structural Condition Assessment of Existing Buildings"

Membership: IStructE (Graduate, United Kingdom), IACM (Spain), IET (United Kingdom), MIES (Chartered, Singapore), ACI (Faculty, United States of America), ASCE (Aff.M.ASCE, SEI member, United States of America).


Editorial roles:

Editorial Board Member: Nature-Scientific Reports (IF: 4.996, ISSN: 2045-2322) <https://www.nature.com/srep/>

Associate Editor: ASCE journal of Practice Periodical on Structural Design and Construction (IF: 1.9, ISSN: 1084-0680), <ascelibrary.org-editorialboard> About: <10th Anniversary>

Guest Editor: Frontiers in Energy Research (IF: 4.008, ISSN: 2296-598X), https://www.frontiersin.org/research-topics/39205

Review Editor: Frontiers in Built Environment (IF: 3.0, ISSN: 2297-3362), Bridge Engineering <click for page weblink> [Submit paper]


Bio.: Born in India, and had his schooling in Aligarh (India) and Benghazi (Libya). After graduating from Z.H. College of Engineering and Technology, Aligarh Muslim Univ. in Civil Engineering and gaining industrial consultancy experience in Holtec Consulting Pvt. Ltd. as a Project Executive, he pursued MSc degree in Structural Engineering on a partial scholarship by the University of Dundee (UK). He then completed his PhD from Loughborough University (UK) on a full Research Studentship provided by Loughborough University. He has been continuously associated with professional bodies, such as IStructE (UK), ACI (USA), IES (Singapore) and IET (UK). He has been a University Teacher at Loughborough University in England and also visited Yildiz Technical University in Turkey as a Visiting ProfessorHe is now working against a Permanent Post as an Assistant Professor in Z.H. College of Engineering and Technology, Aligarh Muslim Univ. and a Guest Scientist in Kiel University, Germany.


University degrees:

PhD: Loughborough University, England, UK [Journal Publications: 04, International conferences: 07]

Master's Degree in Structural Engg.: University of Dundee, Scotland, UK [Journal Publications: 04, International conferences: 05].

Bachelor's Degree in Civil Engg.: Z.H. College of Engineering and Technology Aligarh Muslim University, U.P., India.


Key Industry Exp.: HOLTEC Consulting Pvt. Ltd.

Research Interests: Composite structural systems, Retrofitting, Bio-mechanics, Non-linear finite element modelling, Sequence and Spaces in Mathematics, Building Information/Energy Modeling (BIM/BEM), Building materials, use of industrial waste in construction, and more.

Research groups:

Mechanics of Advanced Materials Research Group (MoAM), Wolfson School, Loughborough University, UK

Built Environment group, School of Civil and Building Engineering, Loughborough University, UK.

Geomechanics & Geotechnics, Institute of Applied Geosciences, Kiel University, Germany

Publications:

Journals (SCI) = 50* (includes accepted)

International Conferences = 26

Updates on: https://www.researchgate.net/profile/Mohammad_Khan320

*He continuously produces several SOLO authored publications in journals of high international repute, including the ASCE journal.

Project Grants:
1. UGC = INR 1 Million
2. DST-SERB = INR 2.5 million (approx.)
Job vacancy under my supervision: Junior Research Fellow (JRF) = 1 post, 3 years duration (no bond) under DST-SERB project. Contact me for more details (preferably, through Email).

Travel Grant:

SERB, ITS: Travel Grant (2017-18)

Patent: (as SOLO inventor)

1. Australian Patent (Granted)
Title of invention: IMPROVED BOLTING METHOD FOR BEAM RETROFITTING AT SOFFIT.
  1. Some Key publications


    1. Khan, M. A. 2021. Toward key research gaps in design recommendations on flexurally plated RC beams susceptible to premature failures. Journal of Bridge Engineering. (ASCE). Vol. 26 (9) <dx.doi.org/>. 
      [IF: 3.066] [ISSN: 1084-0702] [SOLO AUTHORED]
    2. Khan, M. A. 2021. Towards progressive debonding in composite RC beams subjected to thermo-mechanical bending with boundary constraints – A new analytical solution. Journal of Composite Structures. (Elsevier). Vol. 274 (Oct), pg. 114334 <dx.doi.org/>. [IF: 5.407] [ISSN: 0263-8223] [SOLO AUTHORED]

    3. Khan, M. A. 2022. Bond parameters for peeling and debonding in thin plated RC beams subjected to mixed mode loading – Framework. Advances in Structural Engineering. (SAGE). Vol. 25 (3), pg. 662-682 <dx.doi.org/>. [IF: 2.438] [ISSN: 1369-4332] [SOLO AUTHORED]

    4. Khan, M. A., El Rimawi, J., Silberschmidt, V. 2017, Relative Behaviour of Premature failures in Adhesively Plated RC Beam using Controllable and Existing Parameters. Journal of Composite Structures. (Elsevier). Volume 180, 75–87 <dx.doi.org/> [IF: 4.101] [ISSN: 0263-8223]
    5. Khan, M. A., Silberschmidt, V., El Rimawi, J. 2017, Controlled Failure Warning And Mitigation of Prematurely Failing Beam Using Adhesive. Journal of Composite Structures. (Elsevier). Volume 161, 119–131. <dx.doi.org/> [IF: 4.101] [ISSN: 0263-8223]
    6. Khan, M. A., 2014. Numerical study on human cornea and modified multiparametric correction equation for Goldmann applanation tonometer. Journal of the Mechanical Behavior of Biomedical Materials. (Elsevier). Volume 30, February 2014, Pages 91-102. <dx.doi.org/> [Impact Factor: 3.417] [ISSN: 1751-6161] [SOLO AUTHORED]
    7. Khan, M A, El Rimawi, J, Silberschmidt, V. 2017. Numerical representation of multiple premature failures in steel-plated RC beams. International Journal of Computational Methods.  (World Scientific). Vol. 14 (2), pg 21 <dx.doi.org/>. [Impact Factor: 1.123] [ISSN: 0219-8762]
    8. Irshad, K., Algarni, S., Jamil, B., Khan, M. A. 2019, Effect of gender difference on sleeping comfort and building energy utilization: Field study on test chamber with thermoelectric air- cooling system. Journal of Building and Environment. (Elsevier). Vol. 152, January 2019, Pages 214-227 <dx.doi.org/>. [IF: 4.539] [ISSN: 0360-1323]
    9. M.A. Khan et al. 2021. Comparative Overview of the Performance of Cementitious and Non-Cementitious Nanomaterials in Mortar at Normal and Elevated Temperatures. Nanomaterials. (MDPI). Vol. 11 (4), pg 911 <dx.doi.org/> [IF: 5.076] [ISSN: 2079-4991]
    10. M.A. Khan et al. 2022. Experimental and simulation analysis of grid-connected rooftop photovoltaic system for a large-scale facility. Sustainable Energy Technologies and Assessments. (Elsevier). Vol. 53 (Part D, Oct), pg. 102773 <dx.doi.org/> [IF: 7.632] [ISSN: 2213-1388] <Free download link>
    11. M.A. Khan 2023. Integrating BIM with ERP Systems Towards an Integrated Multi-user Interactive Database: Reverse-BIM Approach. In: Ranadive, M.S., Das, B.B., Mehta, Y.A., Gupta, R. (eds) Recent Trends in Construction Technology and Management. Lecture Notes in Civil Engineering. (Springer). Vol. 260, pg. 209–220 <dx.doi.org/> [ISBN: 978-981-19-2144-5]
      [SOLO AUTHORED]
LISTDownloadUPLOADED DATE
CE437-Prestress Concrete -Upto MidSem
17/11/2024
CEA1120- Tutorial sheet 1 _ Q1 to Q61
04/07/2022
CEA1120- Tutorial sheet 1 _ Q66 to Q69
27/05/2023
CEA1120- Tutorial sheet 2 _ Q1 to Q69
04/07/2022
CEA 1120 MCQ n SAQ UNIT 1
26/02/2019
CE111- Pollution
30/09/2016
CE111- Ecosystems
30/09/2016
CE111- References
30/09/2016
CEH 2210 - Construction Management Unit 3
26/02/2019
CEH 2210- Resource Management
02/04/2020
CEH 2210- Chapters on Resource Management
18/04/2023
CEH 2210- BIM in SMEs
18/04/2023
CEH 2210- TOWARDS A THEORETICAL FRAMEWORK FOR HBIM
23/04/2019
CEH 2210- Digital Data Driven Are You Ready
23/04/2019
CEH 2210- ERP in Construction
23/04/2019
CEH 2210- Assignment 1
02/04/2020
CE606 - Week 1
27/08/2020
CE801 - PhD notes from Chapter 4
25/11/2020
CE801 - PhD notes from Chapter 3
25/11/2020
CE801- From Unit 4- Sections of report writing
25/11/2020